Category: Grooving

Showing 177–192 of 474 results

• Sale!

  Iscar 100% Original 6003624 – TAG N7W IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.276 Cutting Width 10 pcs

  $111.60 Original price was: $111.60.$55.80Current price is: $55.80.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003625 – TAG N3C IC807, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003626 – TAG N3J IC807, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003631 – TAG R2J-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003632 – TAG L2J-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003633 – TAG R2J-15D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003635 – TAG R2JS-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003637 – TAG R2JS-15D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003639 – TAG R2C-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003640 – TAG L2C-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003644 – TAG N3J IC20, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $59.80 Original price was: $59.80.$29.90Current price is: $29.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003645 – TAG N1.4J IC807, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.055 Cutting Width 10 pcs

  $69.40 Original price was: $69.40.$34.70Current price is: $34.70.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003646 – TAG N1.4C IC807, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.055 Cutting Width 10 pcs

  $69.40 Original price was: $69.40.$34.70Current price is: $34.70.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003649 – TAG N4C IC20, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $64.20 Original price was: $64.20.$32.10Current price is: $32.10.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003650 – TAG N5C IC20, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.197 Cutting Width 10 pcs

  $68.40 Original price was: $68.40.$34.20Current price is: $34.20.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6003653 – TAG N2J IC20, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $57.00 Original price was: $57.00.$28.50Current price is: $28.50.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart