Brand: Iscar

Showing 4113–4128 of 4723 results

• Sale!

  Iscar 100% Original 6091716 – DGN1402J IC328, 0.055 Cutting Width 10 pcs

  $133.80 Original price was: $133.80.$66.90Current price is: $66.90.

  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • General applications on low carbon, alloy, and austenitic stainless steel.
  • DGNC – with coolant holes, DGNM – single-ended for very deep applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
  • General applications on low carbon, alloy and austenitic stainless steel.
  • Low-to-medium feeds. JS – sharp corner.
  • DGNM – single-ended.

  Add to cart
• Sale!

  Iscar 100% Original 6092748 – TAG R3JS-15D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $82.80 Original price was: $82.80.$41.40Current price is: $41.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6093945 – GTN-2.4 IC354, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.094 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Superior straightness of the cut.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • Designed for deep grooving & large diameters.
  • High reliability, High rigidity, and Increased stability.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • GTN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
  • Available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6094205 – GFN-1.6J IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.063 Cutting Width 10 pcs

  $71.60 Original price was: $71.60.$35.80Current price is: $35.80.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6094225 – GFR-1.6J-8D IC 328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.063 Cutting Width 10 pcs

  $71.60 Original price was: $71.60.$35.80Current price is: $35.80.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6094235 – GFN-2.4 IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.094 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6094435 – GFR-2.4-8D IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.094 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6094895 – GFR-4J-6D IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6096338 – DGR4000JS-15D IC328, 0.157 Cutting Width 10 pcs

  $151.20 Original price was: $151.20.$75.60Current price is: $75.60.

  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • General applications on low carbon, alloy, and austenitic stainless steel.
  • DGNC – with coolant holes, DGNM – single-ended for very deep applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
  • General applications on low carbon, alloy and austenitic stainless steel.
  • Low-to-medium feeds. JS – sharp corner.
  • DGNM – single-ended.

  Add to cart
• Sale!

  Iscar 100% Original 6096815 – GFR-2J-6D IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6096839 – TAG N3C IC5400, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $86.20 Original price was: $86.20.$43.10Current price is: $43.10.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6097015 – DGR3102J-15D IC328, 0.122 Cutting Width 10 pcs

  $133.80 Original price was: $133.80.$66.90Current price is: $66.90.

  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • General applications on low carbon, alloy, and austenitic stainless steel.
  • DGNC – with coolant holes, DGNM – single-ended for very deep applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
  • General applications on low carbon, alloy and austenitic stainless steel.
  • Low-to-medium feeds. JS – sharp corner.
  • DGNM – single-ended.

  Add to cart
• Sale!

  Iscar 100% Original 6097836 – GTN-3W IC354, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Superior straightness of the cut.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • Designed for deep grooving & large diameters.
  • High reliability, High rigidity, and Increased stability.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • GTN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
  • Available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6097846 – GTN-4W IC354, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.160 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Superior straightness of the cut.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • Designed for deep grooving & large diameters.
  • High reliability, High rigidity, and Increased stability.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • GTN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
  • Available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6098336 – GFR-1.6-8D IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.063 Cutting Width 10 pcs

  $71.60 Original price was: $71.60.$35.80Current price is: $35.80.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6098356 – GFR-2-1 5D IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart