Brand: Iscar

Showing 4049–4064 of 4723 results

• Sale!

  Iscar 100% Original 6004549 – TAG N3W IC908, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004551 – TAG N3JT IC908, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004552 – TAG N4JT IC908, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004553 – TAG N4CB IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004671 – TAG N2LF IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004673 – TAG N3LF IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004695 – TAG N3.2JT IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.126 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004696 – TAG N1.6C IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.063 Cutting Width 10 pcs

  $69.40 Original price was: $69.40.$34.70Current price is: $34.70.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004697 – TAG N1.6J IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.063 Cutting Width 10 pcs

  $69.40 Original price was: $69.40.$34.70Current price is: $34.70.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004889 – TAG N2MF IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs

  $75.80 Original price was: $75.80.$37.90Current price is: $37.90.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004892 – TAG N3MF IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004960 – TAG N4MF IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004961 – TAG N4MF IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6004963 – TAG N4MF IC5400, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $93.00 Original price was: $93.00.$46.50Current price is: $46.50.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011365 – GFN-3 IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Designed for deep grooving and large diameters.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • GFN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.
  • These inserts are available from multiple companies.

  Add to cart
• Sale!

  Iscar 100% Original 6011387 – TAG N3J IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart