Brand: Iscar

Showing 4065–4080 of 4723 results

• Sale!

  Iscar 100% Original 6011388 – TAG N4C IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011389 – TAG N4J IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011395 – TAG R3J-6D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011396 – TAG R3C-6D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011397 – TAG R3J-15D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011398 – TAG R3C-15D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011399 – TAG R3C-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011400 – TAG R3J-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011401 – TAG L3C-15D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011402 – TAG L3C-15D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011403 – TAG L3C-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011404 – TAG L3C-6D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011405 – TAG L3J-15D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011407 – TAG L3J-6D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs

  $78.80 Original price was: $78.80.$39.40Current price is: $39.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011409 – TAG L4C-4D IC808, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart
• Sale!

  Iscar 100% Original 6011410 – TAG L4C-4D IC830, TAG – Tang Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs

  $84.80 Original price was: $84.80.$42.40Current price is: $42.40.

  • Cutting edge with positive rake used at low-to-medium feeds.
  • The JS-type has sharp corners.
  • JT chip former has the basic positive configuration of the J-type and a reinforced negative frontal edge.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
  • J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
  • First choice for soft materials, alloy steel and austenitic stainless steel.
  • Parting of tubes, small diameters and thin-walled parts.
  • For grooves, parting off to center, and chamfering.
  • Compatible with standard blades and holders.
  • Use in all CNC machines and manual lathes.
  • Iscar uniquely designed TAG inserts are the first choice for the parting of bars, hard materials and tough applications.
  • A positive rake, single cavity (except 7mm & 12mm with double cavity), negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds.

  Add to cart