Brand: Nachi

Showing 3041–3056 of 4037 results

• Sale!

  Nachi 100% Original 1060131 #42 135° Cobalt Jobbers Drill 1 pcs

  $1.84 Original price was: $1.84.$0.92Current price is: $0.92.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060148 #41 135° Cobalt Jobbers Drill 1 pcs

  $1.85 Original price was: $1.85.$0.93Current price is: $0.93.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060154 #40 135° Cobalt Jobbers Drill 1 pcs

  $1.90 Original price was: $1.90.$0.95Current price is: $0.95.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060160 #39 135° Cobalt Jobbers Drill 1 pcs

  $1.90 Original price was: $1.90.$0.95Current price is: $0.95.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060177 #38 135° Cobalt Jobbers Drill 1 pcs

  $1.85 Original price was: $1.85.$0.93Current price is: $0.93.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060183 #37 135° Cobalt Jobbers Drill 1 pcs

  $2.04 Original price was: $2.04.$1.02Current price is: $1.02.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060190 #36 135° Cobalt Jobbers Drill 1 pcs

  $2.00 Original price was: $2.00.$1.00Current price is: $1.00.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060205 #35 135° Cobalt Jobbers Drill 1 pcs

  $2.04 Original price was: $2.04.$1.02Current price is: $1.02.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060211 #34 135° Cobalt Jobbers Drill 1 pcs

  $2.04 Original price was: $2.04.$1.02Current price is: $1.02.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060228 #33 135° Cobalt Jobbers Drill 1 pcs

  $2.04 Original price was: $2.04.$1.02Current price is: $1.02.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060234 #32 135° Cobalt Jobbers Drill 1 pcs

  $2.11 Original price was: $2.11.$1.06Current price is: $1.06.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060240 #31 135° Cobalt Jobbers Drill 1 pcs

  $2.18 Original price was: $2.18.$1.09Current price is: $1.09.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060257 1/8 135° Cobalt Jobbers Drill 1 pcs

  $2.37 Original price was: $2.37.$1.18Current price is: $1.18.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060263 #30 135° Cobalt Jobbers Drill 1 pcs

  $2.18 Original price was: $2.18.$1.09Current price is: $1.09.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060270 #29 135° Cobalt Jobbers Drill 1 pcs

  $2.36 Original price was: $2.36.$1.18Current price is: $1.18.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060286 #28 135° Cobalt Jobbers Drill 1 pcs

  $2.40 Original price was: $2.40.$1.20Current price is: $1.20.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart