Brand: Nachi

Showing 3201–3216 of 4037 results

• Sale!

  Nachi 100% Original 1080710 1/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $1.65 Original price was: $1.65.$0.82Current price is: $0.82.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080727 5/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $1.57 Original price was: $1.57.$0.78Current price is: $0.78.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080733 3/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $1.57 Original price was: $1.57.$0.78Current price is: $0.78.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080740 7/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $1.78 Original price was: $1.78.$0.89Current price is: $0.89.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080756 1/8 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $2.25 Original price was: $2.25.$1.12Current price is: $1.12.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080762 9/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $2.08 Original price was: $2.08.$1.04Current price is: $1.04.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080779 5/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $2.26 Original price was: $2.26.$1.13Current price is: $1.13.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080785 11/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $2.55 Original price was: $2.55.$1.27Current price is: $1.27.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080791 3/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $2.99 Original price was: $2.99.$1.49Current price is: $1.49.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080807 13/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $3.42 Original price was: $3.42.$1.71Current price is: $1.71.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080813 7/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $3.77 Original price was: $3.77.$1.89Current price is: $1.89.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080820 15/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $4.05 Original price was: $4.05.$2.03Current price is: $2.03.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080836 1/4 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $4.20 Original price was: $4.20.$2.10Current price is: $2.10.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080842 17/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $4.81 Original price was: $4.81.$2.41Current price is: $2.41.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080859 9/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $5.23 Original price was: $5.23.$2.62Current price is: $2.62.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart
• Sale!

  Nachi 100% Original 1080865 19/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

  $6.06 Original price was: $6.06.$3.03Current price is: $3.03.

  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Shorter length allows shallower holes to be drilled.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Bronze Oxide coating gives a polished finish and thus increased lubricity.
  • Cobalt is harder than high-speed steel and suited for better wear resistance.
  • Optimum for high tensile alloys.
  • For machining operations in screw machines.
  • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
  • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
  • Designed for machining operations in screw machines.
  • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
  • Designed for hand-held manual drills and either portable or stationary machines.
  • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
  • Low thrust design: 135 degrees self-centering Split Point.
  • Standard two flute design with spiral, helical flutes.
  • Right hand (CW) cutting direction.
  • Right-hand cutting, heavy-duty screw drill.
  • Straight, bright-finished shank corresponds to the drill diameter.
  • Stub lengths are proportional to the drill diameter.
  • Cobalt base material with Bronze Oxide.
  • Straight shank for universal compatibility.
  • Overall length range: 1-3/8 to 3-3/4 inches.

  Add to cart