Category: Uncategorized
Showing 17–32 of 420 results
-
Korloy 100% Original 1-02-020246 – SP200 PC9030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width SP200 PC9030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022033 – SP500 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.201 Cutting Width SP500 NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022335 – SP200 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width SP200 NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022336 – GTR-2 / SP200R NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width GTR-2 / SP200R NC3030 pcs
$0.00Add to cart- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Korloy 100% Original 1-02-022336 – SP200R NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width SP200R NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022338 – SP300 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width SP300 NC3030 pcs
$0.00Add to cart- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Korloy 100% Original 1-02-022339 – SP300R NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width SP300R NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022340 – SP300L NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width SP300L NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022342 – SP400 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.161 Cutting Width SP400 NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022343 – SP400R NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.161 Cutting Width SP400R NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-022344 – SP400L NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.161 Cutting Width SP400L NC3030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
