Brand: Iscar
Showing 3841–3856 of 4723 results
-
Sale!
Iscar 100% Original 6000037 – GFF 6N IC656, 0.236 Cutting Width 10 pcs
Original price was: $98.40.$49.20Current price is: $49.20.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6000292 – GFN-3 IC54, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs
Original price was: $59.80.$29.90Current price is: $29.90.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6000812 – GTN-2 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width 10 pcs
Original price was: $57.00.$28.50Current price is: $28.50.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000818 – GTN-2 IC54, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width 10 pcs
Original price was: $57.00.$28.50Current price is: $28.50.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000823 – GTN-2.4 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.094 Cutting Width 10 pcs
Original price was: $57.00.$28.50Current price is: $28.50.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000836 – GTN-3 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $59.80.$29.90Current price is: $29.90.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000857 – GTN-3W IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $59.80.$29.90Current price is: $29.90.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000867 – GTN-4 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.160 Cutting Width 10 pcs
Original price was: $64.20.$32.10Current price is: $32.10.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000881 – GTN-4.8 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.187 Cutting Width 10 pcs
Original price was: $68.40.$34.20Current price is: $34.20.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000904 – GTN-5 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.200 Cutting Width 10 pcs
Original price was: $68.40.$34.20Current price is: $34.20.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000923 – GTN-6 IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.250 Cutting Width 10 pcs
Original price was: $74.40.$37.20Current price is: $37.20.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000978 – GTR-2-8D IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width 10 pcs
Original price was: $57.00.$28.50Current price is: $28.50.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6000996 – GTR-2.4-8D IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.094 Cutting Width 10 pcs
Original price was: $57.00.$28.50Current price is: $28.50.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6001008 – GTR-3-8D IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $59.80.$29.90Current price is: $29.90.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6001028 – GTR-3W-8D IC20, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $59.80.$29.90Current price is: $29.90.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6001043 – GTR-4-8D, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.160 Cutting Width 10 pcs
Original price was: $64.20.$32.10Current price is: $32.10.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.