Brand: Iscar
Showing 3873–3888 of 4723 results
-
Sale!
Iscar 100% Original 6002392 – DGR5003J-4D IC354, 0.197 Cutting Width 10 pcs
Original price was: $154.40.$77.20Current price is: $77.20.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002397 – DGN6303C IC354, 0.250 Cutting Width 10 pcs
Original price was: $170.00.$85.00Current price is: $85.00.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002400 – DGN6303J IC354, 0.250 Cutting Width 10 pcs
Original price was: $170.00.$85.00Current price is: $85.00.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002404 – DGR6303C-4D IC354, 0.250 Cutting Width 10 pcs
Original price was: $170.00.$85.00Current price is: $85.00.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002417 – DGN 3102C IC328, DGN – Do-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002419 – DGN4003C IC328, 0.157 Cutting Width 10 pcs
Original price was: $144.20.$72.10Current price is: $72.10.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002420 – DGN4003C IC328, 0.157 Cutting Width 10 pcs
Original price was: $144.20.$72.10Current price is: $72.10.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002421 – DGN 2202C IC328, DGN – Do-Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002422 – DGN2202J IC328, 0.087 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002423 – DGN5003C IC328, 0.197 Cutting Width 10 pcs
Original price was: $154.40.$77.20Current price is: $77.20.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002424 – DGN5003C IC328, 0.197 Cutting Width 10 pcs
Original price was: $154.40.$77.20Current price is: $77.20.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002425 – DGN 6303C IC328, DGN – Do-Grip Carbide Parting / Grooving Insert, 0.250 Cutting Width 10 pcs
Original price was: $170.00.$85.00Current price is: $85.00.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002426 – DGN6303J IC328, 0.250 Cutting Width 10 pcs
Original price was: $170.00.$85.00Current price is: $85.00.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002439 – DGR3102C-6D IC328, 0.122 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002440 – GTN-3 IC354, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width 10 pcs
Original price was: $78.80.$39.40Current price is: $39.40.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.
-
Sale!
Iscar 100% Original 6002441 – GTN-2 IC354, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width 10 pcs
Original price was: $75.80.$37.90Current price is: $37.90.Add to cart- Superior straightness of the cut.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- Designed for deep grooving & large diameters.
- High reliability, High rigidity, and Increased stability.
- Large assortments, available in all standard geometry and width.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- GTN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
- Available from multiple companies.