Brand: Iscar
Showing 3905–3920 of 4723 results
-
Sale!
Iscar 100% Original 6002503 – GFR-4-8D IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs
Original price was: $84.80.$42.40Current price is: $42.40.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002505 – DGN2002C IC354, 0.079 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002506 – DGN2002C IC328, 0.079 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002525 – DGR3102C-8D IC328, 0.122 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002539 – GFN-1.2J IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.047 Cutting Width 10 pcs
Original price was: $69.40.$34.70Current price is: $34.70.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002540 – GFN-4.8 IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.189 Cutting Width 10 pcs
Original price was: $90.00.$45.00Current price is: $45.00.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002541 – GFN-3J IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs
Original price was: $78.80.$39.40Current price is: $39.40.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002544 – GFN-1.2J IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.047 Cutting Width 10 pcs
Original price was: $69.40.$34.70Current price is: $34.70.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002545 – GFN-2J IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.079 Cutting Width 10 pcs
Original price was: $75.80.$37.90Current price is: $37.90.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002549 – GFN-3J IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs
Original price was: $78.80.$39.40Current price is: $39.40.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002566 – GFR-1.2J-10D IC354, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.047 Cutting Width 10 pcs
Original price was: $69.40.$34.70Current price is: $34.70.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002573 – GFN-3 IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.118 Cutting Width 10 pcs
Original price was: $78.80.$39.40Current price is: $39.40.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002574 – GFN-4 IC328, GFN – Self-Grip Carbide Parting / Grooving Insert, 0.157 Cutting Width 10 pcs
Original price was: $84.80.$42.40Current price is: $42.40.Add to cart- Designed for deep grooving and large diameters.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- GFN self locking inserts are ideal for parting applications.
- Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
- Medium-to-high feeds.
- These inserts are available from multiple companies.
-
Sale!
Iscar 100% Original 6002575 – DGR3102J-15D IC354, 0.122 Cutting Width 10 pcs
Original price was: $133.80.$66.90Current price is: $66.90.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
-
Sale!
Iscar 100% Original 6002579 – DGR3100JS-15D IC328, 0.122 Cutting Width 10 pcs
Original price was: $140.60.$70.30Current price is: $70.30.Add to cart- Solid carbide is extremely heat resistant and used for high-speed applications.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- C-Type chip breakers: First choice for parting of bars, hard materials, and tough applications.
- J-Type chip breakers: First choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
- General applications on low carbon, alloy, and austenitic stainless steel.
- DGNC – with coolant holes, DGNM – single-ended for very deep applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters and thin-walled parts.
- General applications on low carbon, alloy and austenitic stainless steel.
- Low-to-medium feeds. JS – sharp corner.
- DGNM – single-ended.
