Category: Uncategorized

Showing 33–48 of 420 results

• 

  Korloy 100% Original 1-02-022346 – SP600 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.252 Cutting Width SP600 NC3030 pcs

  $0.00

  • Fits into any GTN style holder or blade.
  • Cutting tool life extended due to specially designed rake angle.
  • Minimum size of nose radius has been implemented to eliminate burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Designed for deep grooving and large diameters.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.

  Add to cart
• 

  Korloy 100% Original 1-02-023173 – SP400 PC9030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.161 Cutting Width SP400 PC9030 pcs

  $0.00

  • Fits into any GTN style holder or blade.
  • Cutting tool life extended due to specially designed rake angle.
  • Minimum size of nose radius has been implemented to eliminate burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Designed for deep grooving and large diameters.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.

  Add to cart
• 

  Korloy 100% Original 1-02-023223 – MGMN300-G PC9030, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MGMN300-G PC9030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023224 – MGMN400-G PC9030, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MGMN400-G PC9030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023240 – MGMN300-M NC3030, MGT – Grooving Carbide Parting / Grooving Insert, 0.118 Cutting Width MGMN300-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023310 – MGMN200-G PC9030, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MGMN200-G PC9030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023311 – MGMN250-G PC9030, MGT Carbide Parting / Grooving Insert, 0.098 Cutting Width MGMN250-G PC9030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023313 – MGMN200-M PC9030, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MGMN200-M PC9030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023390 – MGMN500-M NC3030, MGT Carbide Parting / Grooving Insert, 0.197 Cutting Width MGMN500-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023392 – MGMN600-M NC3030, MGT Carbide Parting / Grooving Insert, 0.236 Cutting Width MGMN600-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023554 – MGMN200-G NC3030, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MGMN200-G NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-023658 – SNEX1206ANN-MM PC6510, Square, Indexable Carbide Milling Insert SNEX1206ANN-MM PC6510 pcs

  $0.00

  Add to cart
• 

  Korloy 100% Original 1-02-024572 – MGMN800-M NC3030, MGT Carbide Parting / Grooving Insert, 0.315 Cutting Width MGMN800-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-024601 – MRMN400-M NC3030, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MRMN400-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-024602 – MRMN600-M NC3030, MGT Carbide Parting / Grooving Insert, 0.236 Cutting Width MRMN600-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-024727 – MGMN300-G NC3030, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MGMN300-G NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart