Category: Uncategorized

Showing 49–64 of 420 results

• 

  Korloy 100% Original 1-02-024803 – SP480 NC3030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.187 Cutting Width SP480 NC3030 pcs

  $0.00

  • GTN self locking inserts are ideal for parting applications.
  • Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength.
  • Medium-to-high feeds. GTN inserts are the most popular self grip inserts in the industry today.
  • Available from multiple companies.

  Add to cart
• 

  Korloy 100% Original 1-02-025314 – MRMN200-M NC3030, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MRMN200-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025387 – MGMN400-M NC3120, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MGMN400-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025413 – MGMN300-M NC3120, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MGMN300-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025637 – MRMN300-M NC3120, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MRMN300-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025638 – MRMN400-M NC3120, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MRMN400-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025651 – MGMN200-G NC3120, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MGMN200-G NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025652 – MGMN400-G NC3120, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MGMN400-G NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025719 – SP400 NC3120, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.161 Cutting Width SP400 NC3120 pcs

  $0.00

  • Fits into any GTN style holder or blade.
  • Cutting tool life extended due to specially designed rake angle.
  • Minimum size of nose radius has been implemented to eliminate burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Designed for deep grooving and large diameters.
  • The tool design provides extra cutting-edge strength.
  • Suitable for turning and planning at cutting speeds with large feeds.
  • For machining in unfavorable conditions; permits use of sharp positive angles.
  • Large assortments, available in all standard geometry and width.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.

  Add to cart
• 

  Korloy 100% Original 1-02-025721 – MGMN150-G NC3030, MGT Carbide Parting / Grooving Insert, 0.059 Cutting Width MGMN150-G NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025723 – MGMN200-M NC3120, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MGMN200-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025727 – MRMN200-M NC3120, MGT Carbide Parting / Grooving Insert, 0.079 Cutting Width MRMN200-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025729 – MRMN300-M NC3030, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MRMN300-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025732 – MRMN500-M NC3030, MGT Carbide Parting / Grooving Insert, 0.197 Cutting Width MRMN500-M NC3030 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025928 – MGMN500-M NC3120, MGT Carbide Parting / Grooving Insert, 0.197 Cutting Width MGMN500-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart
• 

  Korloy 100% Original 1-02-025929 – MGMN600-M NC3120, MGT Carbide Parting / Grooving Insert, 0.236 Cutting Width MGMN600-M NC3120 pcs

  $0.00

  • Double edged inserts for better economical machining.
  • MGT system reduces use of more tools as it allows one tool for many applications.
  • MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
  • Excellent surface roughness even in high feed applications by using a wiper function.
  • Korloy s line-up of holders gives you more options and benefits.
  • Minimum size of nose radius eliminates burrs.
  • Solid carbide is extremely heat resistant and used for high-speed applications.
  • Large assortments, available in all standard geometry and width.
  • Ability to groove, turn, face or copy in single application.
  • Chip breaker designed for turning & grooving applications.
  • PVD-coated grade is the first choice for parting-off in stable conditions.
  • CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
  • Parting / cut-off inserts that don t require screws, springs and clamps.
  • Ideal for parting and grooving applications.
  • Insert geometry designed for parting and grooving multiple materials.
  • Used to produce grooves and to cut-off (parting) pieces in a turning machine.
  • Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
  • Korloy MGT parting and grooving inserts are double sided inserts.
  • Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
  • Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
  • MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
  • Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.

  Add to cart