Category: Boring Bar
Showing 1–16 of 98 results
-
Sale!
Carmex 100% Original CBR 4 R0.2 L10 TNX Min Bore Diam, .390 Max Bore Depth, 4mm Shank Diam., Solid Carbide Mini Boring Bar 1 pcs
Original price was: $18.61.$9.31Current price is: $9.31.Add to cart- Advanced carbide grade TNX for higher feeds & higher performance, at medium to high cutting speed.
- High edge stability & better chip flow thanks to extra fine grain size with high hardness & toughness & triple layer reddish coating.
- Excels on machining stainless steels, super alloys & other difficult materials that create curly chips.
- Also effective general purpose solution for a wide range of materials.
- Left hand cutting also available (CBL).
-
Sale!
Carmex 100% Original CBR 4 R0.2 L15 TNX Min Bore Diam, .590 Max Bore Depth, 4mm Shank Diam., Solid Carbide Mini Boring Bar 1 pcs
Original price was: $19.91.$9.96Current price is: $9.96.Add to cart- Advanced carbide grade TNX for higher feeds & higher performance, at medium to high cutting speed.
- High edge stability & better chip flow thanks to extra fine grain size with high hardness & toughness & triple layer reddish coating.
- Excels on machining stainless steels, super alloys & other difficult materials that create curly chips.
- Also effective general purpose solution for a wide range of materials.
- Left hand cutting also available (CBL).
-
Sale!
Carmex 100% Original CBR 5 R0.2 L15 TNX Min Bore Diam, .590 Max Bore Depth, 5mm Shank Diam., Solid Carbide Mini Boring Bar 1 pcs
Original price was: $20.78.$10.39Current price is: $10.39.Add to cart- Advanced carbide grade TNX for higher feeds & higher performance, at medium to high cutting speed.
- High edge stability & better chip flow thanks to extra fine grain size with high hardness & toughness & triple layer reddish coating.
- Excels on machining stainless steels, super alloys & other difficult materials that create curly chips.
- Also effective general purpose solution for a wide range of materials.
- Left hand cutting also available (CBL).
-
Sale!
Carmex 100% Original CBR 6 R0.2 L22 TNX Min Bore Diam, .870 Max Bore Depth, 6mm Shank Diam., Solid Carbide Mini Boring Bar 1 pcs
Original price was: $23.81.$11.90Current price is: $11.90.Add to cart- Advanced carbide grade TNX for higher feeds & higher performance, at medium to high cutting speed.
- High edge stability & better chip flow thanks to extra fine grain size with high hardness & toughness & triple layer reddish coating.
- Excels on machining stainless steels, super alloys & other difficult materials that create curly chips.
- Also effective general purpose solution for a wide range of materials.
- Left hand cutting also available (CBL).
-
Sale!
Carmex 100% Original MG 0606C8 R05 6mm Min Bore Diam, .310 Max Bore Depth, 6mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $74.02.$37.01Current price is: $37.01.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 0606C8 W08 .236 Min Bore Diam, .310 Max Bore Depth, 6mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $74.02.$37.01Current price is: $37.01.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 08078D10 W10 .307 Min Bore Diam, .390 Max Bore Depth, 8mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $94.66.$47.33Current price is: $47.33.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 10088D16 R05 8.80mm Min Bore Diam, .630 Max Bore Depth, 8mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $105.23.$52.61Current price is: $52.61.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 10098D20 W12 .386 Min Bore Diam, .790 Max Bore Depth, 10mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $105.22.$52.61Current price is: $52.61.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1010D20 R06 10mm Min Bore Diam, .790 Max Bore Depth, 10mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $105.23.$52.61Current price is: $52.61.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1212D30 R09 12mm Min Bore Diam, 1.180 Max Bore Depth, 12mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $111.27.$55.64Current price is: $55.64.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1616E30 W14 .630 Min Bore Diam, 1.180 Max Bore Depth, 16mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $159.61.$79.80Current price is: $79.80.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1616E40 R10 16mm Min Bore Diam, 1.570 Max Bore Depth, 16mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $159.60.$79.80Current price is: $79.80.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1616E40 R15 16mm Min Bore Diam, 1.570 Max Bore Depth, 16mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $159.60.$79.80Current price is: $79.80.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1616E40 W17 .630 Min Bore Diam, 1.570 Max Bore Depth, 16mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $159.60.$79.80Current price is: $79.80.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.
-
Sale!
Carmex 100% Original MG 1616E45 W19 .630 Min Bore Diam, 1.770 Max Bore Depth, 16mm Shank Diam., Solid Carbide Boring Bar 1 pcs
Original price was: $159.60.$79.80Current price is: $79.80.Add to cart- Spiral flutes allow smooth cutting action.
- Longer tool life due to special multi-layer coating.
- Shorter machining time due to multi, 3 to 5, flutes.
- Coolant through the flutes.
- Special MT8 grade AlTiN coated for extremely high heat resistance, smooth cutting operation, high performance and normal machining conditions.