Category: Six-Flute
Showing 1–16 of 20 results
-
Sale!
CERATIZIT 100% Original 12179618 1 Size, 1-3/4 LOC, 6 Flute, Solid Carbide Roughing End Mill 1 pcs
Original price was: $147.65.$73.83Current price is: $73.83.Add to cart- The hi-helix & fine profile geometry reduces tool pressure & generates less heat while allowing heavier cuts at increased feed rates.
- Complete with fine pitch chipbreakers that relieve pressure during aggressive roughing applications.
- Standard 40° helix helps relieve heat during cutting.
- Standard with nACRo coating for added scratch and heat resistance.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12179619 1 Size, 1-3/4 LOC, 6 Flute, Solid Carbide Roughing End Mill 1 pcs
Original price was: $147.65.$73.83Current price is: $73.83.Add to cart- The hi-helix & fine profile geometry reduces tool pressure & generates less heat while allowing heavier cuts at increased feed rates.
- Complete with fine pitch chipbreakers that relieve pressure during aggressive roughing applications.
- Standard 40° helix helps relieve heat during cutting.
- Standard with nACRo coating for added scratch and heat resistance.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12179621 1 Size, 2-5/8 LOC, 6 Flute, Solid Carbide Roughing End Mill 1 pcs
Original price was: $222.57.$111.29Current price is: $111.29.Add to cart- The hi-helix & fine profile geometry reduces tool pressure & generates less heat while allowing heavier cuts at increased feed rates.
- Complete with fine pitch chipbreakers that relieve pressure during aggressive roughing applications.
- Standard 40° helix helps relieve heat during cutting.
- Standard with nACRo coating for added scratch and heat resistance.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12179622 1 Size, 2-5/8 LOC, 6 Flute, Solid Carbide Roughing End Mill 1 pcs
Original price was: $222.57.$111.29Current price is: $111.29.Add to cart- The hi-helix & fine profile geometry reduces tool pressure & generates less heat while allowing heavier cuts at increased feed rates.
- Complete with fine pitch chipbreakers that relieve pressure during aggressive roughing applications.
- Standard 40° helix helps relieve heat during cutting.
- Standard with nACRo coating for added scratch and heat resistance.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185594 1/4 Size, 5/8 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $23.46.$11.73Current price is: $11.73.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185596 1/4 Size, 5/8 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $27.50.$13.75Current price is: $13.75.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185598 5/16 Size, 3/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $30.58.$15.29Current price is: $15.29.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185600 5/16 Size, 3/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $34.52.$17.26Current price is: $17.26.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185602 3/8 Size, 1 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $35.16.$17.58Current price is: $17.58.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185604 3/8 Size, 1 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $37.52.$18.76Current price is: $18.76.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185606 1/2 Size, 1-1/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $52.89.$26.45Current price is: $26.45.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185608 1/2 Size, 2-1/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $57.94.$28.97Current price is: $28.97.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185610 1/2 Size, 1-7/8 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $55.42.$27.71Current price is: $27.71.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185612 5/8 Size, 1-1/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $69.52.$34.76Current price is: $34.76.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185614 5/8 Size, 2-1/4 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $79.95.$39.97Current price is: $39.97.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.
-
Sale!
CERATIZIT 100% Original 12185616 5/8 Size, 2-1/2 LOC, 6 Flute, ZrN Solid Carbide Finishing End Mill 1 pcs
Original price was: $77.52.$38.76Current price is: $38.76.Add to cart- 43.5°/46.5° variable helix reduces vibration resulting in improved finishes.
- Minimal protective radius on corners to protect corners from chipping.
- Undercut shank provides deeper access.
- ZrN coating is specifically for machining aluminum and other non-ferrous materials as it keeps the chips from gumming up and sticking together.
- Coatings increase tool life, enhances chip flow and lubricates through the cut.