Category: Uncategorized
Showing 1–16 of 420 results
-
Korloy 100% Original 1-02-013585 – SP300 PC9030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.122 Cutting Width SP300 PC9030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
-
Korloy 100% Original 1-02-015139 – MGMN400-M PC9030, MGT Carbide Parting / Grooving Insert, 0.157 Cutting Width MGMN400-M PC9030 pcs
$0.00Add to cart- Double edged inserts for better economical machining.
- MGT system reduces use of more tools as it allows one tool for many applications.
- MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
- Excellent surface roughness even in high feed applications by using a wiper function.
- Korloy s line-up of holders gives you more options and benefits.
- Minimum size of nose radius eliminates burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Large assortments, available in all standard geometry and width.
- Ability to groove, turn, face or copy in single application.
- Chip breaker designed for turning & grooving applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
- Korloy MGT parting and grooving inserts are double sided inserts.
- Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
- Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
- MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
- Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.
-
Korloy 100% Original 1-02-015140 – MGMN300-M PC9030, MGT Carbide Parting / Grooving Insert, 0.118 Cutting Width MGMN300-M PC9030 pcs
$0.00Add to cart- Double edged inserts for better economical machining.
- MGT system reduces use of more tools as it allows one tool for many applications.
- MGT tools have a flat geometry on their cutting edge to ensure excellent surface roughness.
- Excellent surface roughness even in high feed applications by using a wiper function.
- Korloy s line-up of holders gives you more options and benefits.
- Minimum size of nose radius eliminates burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Large assortments, available in all standard geometry and width.
- Ability to groove, turn, face or copy in single application.
- Chip breaker designed for turning & grooving applications.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from steel, stainless steel, cast iron, high temp exotic alloy, non ferrous.
- Korloy MGT parting and grooving inserts are double sided inserts.
- Innovative chip breaker and grades reduce cycle time & increase productivity with the ability to groove, turn, face or copy in an application.
- Korloy s MGT system allows a machinist to apply one tool against many applications and reduces the number of tools.
- MGT tools have a flat geometry on its cutting edge to ensure an excellent surface roughness.
- Even in high feed applications by using a wiper function, Korloy ensures excellent surface roughness.
-
Korloy 100% Original 1-02-018954 – SP200R PC9030, GTN – Self-Grip Carbide Parting / Grooving Insert, 0.087 Cutting Width SP200R PC9030 pcs
$0.00Add to cart- Fits into any GTN style holder or blade.
- Cutting tool life extended due to specially designed rake angle.
- Minimum size of nose radius has been implemented to eliminate burrs.
- Solid carbide is extremely heat resistant and used for high-speed applications.
- Designed for deep grooving and large diameters.
- The tool design provides extra cutting-edge strength.
- Suitable for turning and planning at cutting speeds with large feeds.
- For machining in unfavorable conditions; permits use of sharp positive angles.
- Large assortments, available in all standard geometry and width.
- Parting / cut-off inserts that don t require screws, springs and clamps.
- Ideal for parting and grooving applications.
- Insert geometry designed for parting and grooving multiple materials.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Suitable for application on a wide range of workpiece materials from low carbon steel, alloy steel, austenitic stainless steel to tough-to-machine materials.
- PVD-coated grade is the first choice for parting-off in stable conditions.
- CVD-coated grade for tough and demanding operations such as parting-off to centre and interrupted cuts.
