Brand: Nachi
-
Nachi 1057855 1-3/16 118° 13 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Nachi 1057861 1-7/32 118° 12-1/8 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057878 1-1/4 118° 12-1/2 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057884 1-1/4 118° 13-1/2 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Nachi 1057890 1-5/16 118° 14-1/4 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057906 1-5/16 118° 14-1/4 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Nachi 1057912 1-3/8 118° 14-1/2 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057929 1-3/8 118° 14-1/2 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Nachi 1057935 1-7/16 118° 14-3/4 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057941 1-7/16 118° 14-3/4 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Nachi 1057958 1-1/2 118° 15 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Nachi 1057964 1-1/2 118° 15 OAL M35 5% Cobalt Coolant Fed Drill
Price on requestRequest a Quote- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
