Brand: Nachi
Showing 4001–4016 of 5286 results
-
Sale!
Nachi 100% Original 1054398 X 135° Cobalt Jobbers Drill 1 pcs
Original price was: $12.89.$4.30Current price is: $4.30.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1054403 Y 135° Cobalt Jobbers Drill 1 pcs
Original price was: $13.69.$4.56Current price is: $4.56.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1054410 13/32 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $25.59.$8.53Current price is: $8.53.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054426 Z 135° Cobalt Jobbers Drill 1 pcs
Original price was: $14.38.$4.79Current price is: $4.79.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1054432 27/64 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $27.83.$9.28Current price is: $9.28.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054449 7/16 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $28.37.$9.46Current price is: $9.46.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054455 29/64 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $31.50.$10.50Current price is: $10.50.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054461 15/32 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $32.66.$10.89Current price is: $10.89.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054478 31/64 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $36.60.$12.20Current price is: $12.20.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
-
Sale!
Nachi 100% Original 1054484 1/2 Size, 118°, Cobalt Taper Length Drill 1 pcs
Original price was: $34.90.$11.63Current price is: $11.63.Add to cart- X-type thinning reduces the thrust load substantially, and the biting performance improves.
- Cobalt material increases heat resistance and increases drill life and productivity.
- Used in machining hard material, alloy steel, forging and cast iron.
- Drilling deeper holes vs standard jobbers length drills.
- 30° helix.
- Black oxide
- Drill torerance; h8.
- General purpose.
- X-type thinning point type.
