Brand: Nachi

Showing 4321–4336 of 5286 results

• Sale!

  Nachi 100% Original 1060446 #15 135° Cobalt Jobbers Drill 1 pcs

  $3.53 Original price was: $3.53.$1.18Current price is: $1.18.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060452 #14 135° Cobalt Jobbers Drill 1 pcs

  $3.53 Original price was: $3.53.$1.18Current price is: $1.18.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060469 #13 135° Cobalt Jobbers Drill 1 pcs

  $3.45 Original price was: $3.45.$1.15Current price is: $1.15.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060475 3/16 135° Cobalt Jobbers Drill 1 pcs

  $3.24 Original price was: $3.24.$1.08Current price is: $1.08.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060481 #12 135° Cobalt Jobbers Drill 1 pcs

  $3.96 Original price was: $3.96.$1.32Current price is: $1.32.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060498 #11 135° Cobalt Jobbers Drill 1 pcs

  $3.96 Original price was: $3.96.$1.32Current price is: $1.32.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060503 #10 135° Cobalt Jobbers Drill 1 pcs

  $3.64 Original price was: $3.64.$1.21Current price is: $1.21.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060510 #9 135° Cobalt Jobbers Drill 1 pcs

  $3.64 Original price was: $3.64.$1.21Current price is: $1.21.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060526 #8 135° Cobalt Jobbers Drill 1 pcs

  $3.64 Original price was: $3.64.$1.21Current price is: $1.21.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060532 #7 135° Cobalt Jobbers Drill 1 pcs

  $3.60 Original price was: $3.60.$1.20Current price is: $1.20.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060549 13/64 135° Cobalt Jobbers Drill 1 pcs

  $3.76 Original price was: $3.76.$1.25Current price is: $1.25.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060555 #6 135° Cobalt Jobbers Drill 1 pcs

  $4.70 Original price was: $4.70.$1.57Current price is: $1.57.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060561 #5 135° Cobalt Jobbers Drill 1 pcs

  $4.70 Original price was: $4.70.$1.57Current price is: $1.57.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060578 #4 135° Cobalt Jobbers Drill 1 pcs

  $4.70 Original price was: $4.70.$1.57Current price is: $1.57.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060584 #3 135° Cobalt Jobbers Drill 1 pcs

  $4.49 Original price was: $4.49.$1.50Current price is: $1.50.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060590 7/32 135° Cobalt Jobbers Drill 1 pcs

  $4.12 Original price was: $4.12.$1.37Current price is: $1.37.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart