WhatsApp:+1 3369798015 EMAIL:wgsina@gmail.com

Cart

Your Cart is Empty

Back To Shop
Payment Details
Sub Total $0.00

View cartCheckout

Category

Call To +852 53773160

Category

Recent Posts

Brand: Nachi

Showing 4465–4480 of 5286 results

  • Sale! Nachi 100% Original 1080865 19/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080865 19/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $6.06.Current price is: $2.02.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080871 5/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080871 5/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $6.50.Current price is: $2.17.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080888 21/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080888 21/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $7.20.Current price is: $2.40.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080894 11/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080894 11/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $7.80.Current price is: $2.60.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080900 23/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080900 23/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $9.12.Current price is: $3.04.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080916 3/8 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080916 3/8 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $8.95.Current price is: $2.98.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080922 25/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080922 25/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $10.29.Current price is: $3.43.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080939 13/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080939 13/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $10.64.Current price is: $3.55.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080945 27/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080945 27/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $11.72.Current price is: $3.91.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080951 7/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080951 7/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $12.08.Current price is: $4.03.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080968 29/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080968 29/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $14.50.Current price is: $4.83.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080974 15/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080974 15/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $14.86.Current price is: $4.95.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080980 31/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080980 31/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $16.02.Current price is: $5.34.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1080997 1/2 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1080997 1/2 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $13.96.Current price is: $4.65.
    • Low thrust design allows for easier penetration.
    • Two flute design offers faster feed and larger material removal rates.
    • Shorter length allows shallower holes to be drilled.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Bronze Oxide coating gives a polished finish and thus increased lubricity.
    • Cobalt is harder than high-speed steel and suited for better wear resistance.
    • Optimum for high tensile alloys.
    • For machining operations in screw machines.
    • Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
    • Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
    • Designed for machining operations in screw machines.
    • Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
    • Designed for hand-held manual drills and either portable or stationary machines.
    • Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
    • Low thrust design: 135 degrees self-centering Split Point.
    • Standard two flute design with spiral, helical flutes.
    • Right hand (CW) cutting direction.
    • Right-hand cutting, heavy-duty screw drill.
    • Straight, bright-finished shank corresponds to the drill diameter.
    • Stub lengths are proportional to the drill diameter.
    • Cobalt base material with Bronze Oxide.
    • Straight shank for universal compatibility.
    • Overall length range: 1-3/8 to 3-3/4 inches.
    Add to cart
  • Sale! Nachi 100% Original 1081001 A Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1081001 A Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $4.37.Current price is: $1.46.
    • Standard NAS907 Type C.
    • Manufactured with short overall and flute length
    Add to cart
  • Sale! Nachi 100% Original 1081018 B Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Nachi 100% Original 1081018 B Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs

    Original price was: $4.64.Current price is: $1.55.
    • Standard NAS907 Type C.
    • Manufactured with short overall and flute length
    Add to cart

Archives

Categories

× How can I help you?