Category: Tool Holder
-
ZCC-CT ON08-05 Tool Holder Steel
Price on requestRequest a Quote- Utilizes 16 cornered ONHU octagon inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes 16 cornered ONHU inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Coolant thru capable.
- Very strong and durable face mills.
- Suitable for multiple materials.
-
ZCC-CT ON08-06 Tool Holder Steel
Price on requestRequest a Quote- Utilizes 16 cornered ONHU octagon inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes 16 cornered ONHU inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Coolant thru capable.
- Very strong and durable face mills.
- Suitable for multiple materials.
-
ZCC-CT ON08-07 Tool Holder Holder:FMA12-4.00”-B1.25”-ON08-07
Price on requestRequest a Quote- Utilizes 16 cornered ONHU octagon inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes 16 cornered ONHU inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Coolant thru capable.
- Very strong and durable face mills.
- Suitable for multiple materials.
-
ZCC-CT PN11-05 Tool Holder Holder:FMD02-2.00-A0.75-PN11-05
Price on requestRequest a Quote- Utilizes ten cornered PNEG inserts.
- Inserts are negative for strong cutting edge.
- 67° approach angle for high performance in cast irons
- Positive rake angle reduced cutting forces.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes ten cornered PNEG inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Very strong and durable face mills.
- Suitable for cast irons and steels
-
ZCC-CT PN11-06 Tool Holder Holder:FMD02-2.50-A0.75-PN11-06
Price on requestRequest a Quote- Utilizes ten cornered PNEG inserts.
- Inserts are negative for strong cutting edge.
- 67° approach angle for high performance in cast irons
- Positive rake angle reduced cutting forces.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes ten cornered PNEG inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Very strong and durable face mills.
- Suitable for cast irons and steels
-
ZCC-CT PN11-08 Tool Holder Holder:FMD02-3.00-A1.00-PN11-08
Price on requestRequest a Quote- Utilizes ten cornered PNEG inserts.
- Inserts are negative for strong cutting edge.
- 67° approach angle for high performance in cast irons
- Positive rake angle reduced cutting forces.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes ten cornered PNEG inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Very strong and durable face mills.
- Suitable for cast irons and steels
-
ZCC-CT PN11-10 Tool Holder Steel
Price on requestRequest a Quote- Utilizes ten cornered PNEG inserts.
- Inserts are negative for strong cutting edge.
- 67° approach angle for high performance in cast irons
- Positive rake angle reduced cutting forces.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
- Utilizes ten cornered PNEG inserts.
- Inserts available in multiple grades.
- 0° negative relief angle for insert strength and durability.
- Very strong and durable face mills.
- Suitable for cast irons and steels
-
ZCC-CT SN12-04C Tool Holder Steel
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
-
ZCC-CT SN12-06C Tool Holder Steel
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
-
ZCC-CT SN12-07 Tool Holder Holder:FMA11-4.00-B1.25-SN12-07
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
-
ZCC-CT SN12-07C Tool Holder Steel
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
-
ZCC-CT SN15-07C Tool Holder Holder:FMA11-3.00-A1.00-SN15-07C
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
-
ZCC-CT SN15-09 Tool Holder Steel
Price on requestRequest a Quote- Utilizes eight cornered SNEG inserts.
- Inserts are negative for strong cutting edge.
- Ideal 45° approach angle for larger table feed rates.
- Positive rake angle reduced cutting forces.
- Wiper flats provide better surface finishes.
- Screw on system for less chip interference.
- PVD coated cutter bodies for superior corrosion & heat resistance.
