Iscar TTG-16E-A55 IC908 Heat-Resistant
Brand: Iscar
$72.67
- This unique (patented) geometry is a 16 mm round insert with 5 double-sided corners, providing 10 cutting corners.
- The new geometry provides the most economical price per threading corner (when compared with the popular 3 corner lay down inserts).
- The new DECA-IQ-THREAD line was developed according to an advanced technological procedure, which results in very accurate geometry and edge location repeatability after corner indexing.
- The new inserts are made from the versatile grade IC908. The new inserts also provide advantageous tool life when compared to major threading insert manufacturers.
- The tools that carry the new inserts feature coolant channels designed also for the use of high pressure coolant.
- 4 corner indexing can be performed by only a partial opening of the clamping screw, so the indexing action is short and easy and no setup operation is then required.
Machining Application IC908
P SteelM Stainless steelK Cast iron
Iscar grade — recommended for steel (P), stainless steel (M), cast iron (K).
Recommended cutting data
Group P — Carbon & alloy steels
- Low-carbon / structural steel (HB ≤ 200)
Vc: 180–320 m/min; f: 0.10–0.40 mm/rev; ap ≤ 4.0 mm - Alloy / quenched-and-tempered steel (HB 200–330)
Vc: 120–240 m/min; f: 0.10–0.35 mm/rev; ap ≤ 3.0 mm
Raise Vc for continuous cuts; lower it and pick a tougher chipbreaker for interrupted cuts.
Group M — Stainless steel
- Ferritic / martensitic (HB ≤ 220)
Vc: 120–200 m/min; f: 0.08–0.30 mm/rev; ap ≤ 3.0 mm - Austenitic 304 / 316 (work-hardening)
Vc: 90–160 m/min; f: 0.08–0.25 mm/rev; ap ≤ 2.5 mm
Flood coolant; avoid too low a feed to prevent work hardening.
Group K — Cast iron
- Grey iron (HB ≤ 240)
Vc: 120–280 m/min; f: 0.15–0.50 mm/rev; ap ≤ 4.0 mm - Ductile / nodular iron (HB 200–300)
Vc: 100–220 m/min; f: 0.12–0.40 mm/rev; ap ≤ 3.0 mm
Dry or minimal coolant works; mind the entry impact.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
ⓘ
Prices move with raw-material (tungsten / steel) market rates. Please confirm the current price with us before placing your order — thank you.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
We accept
| Brand | Iscar |
|---|---|
| Part No. (MPN) | TTG-16E-A55 |
| Grade | IC908 |
| Category | Accessory |
What Buyers Say
★★★★★
100% recomendados los insertos, y el paquete está llegando muy rapido
★★★★★
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
★★★★★
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
★★★★★
A good product and the seller offered a nice discount
★★★★★
the product is like show in the picture
★★★★★
дошло быстрее чем заявлено. все супер
