Category
- Uncategorized
- Accessory
- Borings
- Drills
- EndMills
- Insert
- Brazed / Welding Inserts
- Drilling Inserts
- Grooving & Parting Inserts
- Threading Inserts
- Turning Inserts
- Diamond 55° (DNMG)
- Diamond 80° (CNMG)
- Parallelogram 55° (KNUX)
- Pentagon (PNMA)
- Rhombic 35° (VNMG)
- Round (RCMT)
- Square (SNMG)
- Triangle (TNMG)
- Trigon 80° (WNMG)
- Back turning insert (ABS)
- Diamond 25° (XCGT)
- Diamond 25° (XCMT)
- Diamond 25° (XPGT)
- Diamond 55° (DCET)
- Diamond 55° (DCGA)
- Diamond 55° (DCGT)
- Diamond 55° (DCGW)
- Diamond 55° (DCMA)
- Diamond 55° (DCMT)
- Diamond 55° (DCMW)
- Diamond 55° (DCMX)
- Diamond 55° (DEGX)
- Diamond 55° (DNG)
- Diamond 55° (DNGA)
- Diamond 55° (DNGG)
- Diamond 55° (DNGM)
- Diamond 55° (DNJG)
- Diamond 55° (DNMA)
- Diamond 55° (DNML)
- Diamond 55° (DNMM)
- Diamond 55° (DNMR)
- Diamond 55° (DNMX)
- Diamond 55° (DPGT)
- Diamond 55° (DPMT)
- Diamond 55° (NMG)
- Diamond 80° (CCET)
- Diamond 80° (CCEW)
- Diamond 80° (CCGA)
- Diamond 80° (CCGE)
- Diamond 80° (CCGH)
- Diamond 80° (CCGT)
- Diamond 80° (CCGW)
- Diamond 80° (CCMA)
- Diamond 80° (CCMH)
- Diamond 80° (CCMT)
- Diamond 80° (CCMW)
- Diamond 80° (CCMX)
- Diamond 80° (CNG)
- Diamond 80° (CNGA)
- Diamond 80° (CNGG)
- Diamond 80° (CNGM)
- Diamond 80° (CNGP)
- Diamond 80° (CNGX)
- Diamond 80° (CNMA)
- Diamond 80° (CNMM)
- Diamond 80° (CNMN)
- Diamond 80° (CNMP)
- Diamond 80° (CNMU)
- Diamond 80° (CNMX)
- Diamond 80° (CPEW)
- Diamond 80° (CPG)
- Diamond 80° (CPGA)
- Diamond 80° (CPGB)
- Diamond 80° (CPGT)
- Diamond 80° (CPMA)
- Diamond 80° (CPMB)
- Diamond 80° (CPMH)
- Diamond 80° (CPMT)
- Diamond 80° (CPMX)
- Double-sided Double-edge General Grooving Insert
- Double-Sided Two Edges Grooving & Parting Insert
- Micro Mini Twin
- Mini Cut-off Insert
- Mini Precision Grooving & Parting Insert
- Mini Single Edge External Grooving Part-off Insert
- Mini Single Edge Parting
- Multi-Directional
- Narrow Slot Single Tip
- Partial Tip CBN Insert
- Rhombic 35° (PBVBW)
- Rhombic 35° (PBVC)
- Rhombic 35° (PBVG)
- Rhombic 35° (VBET)
- Rhombic 35° (VBGA)
- Rhombic 35° (VBGT)
- Rhombic 35° (VBGW)
- Rhombic 35° (VBMA)
- Rhombic 35° (VBMT)
- Rhombic 35° (VCET)
- Rhombic 35° (VCGA)
- Rhombic 35° (VCGT)
- Rhombic 35° (VCGW)
- Rhombic 35° (VCMA)
- Rhombic 35° (VCMT)
- Rhombic 35° (VCMX)
- Rhombic 35° (VDGX)
- Rhombic 35° (VNGA)
- Rhombic 35° (VNGG)
- Rhombic 35° (VNGM)
- Rhombic 35° (VNMA)
- Rhombic 35° (VPET)
- Rhombic 35° (VPGT)
- Rhombic 35° (VPMA)
- Round (RCGT)
- Round (RCGX)
- Round (RCMX)
- Round (RNG)
- Round (RNMA)
- Round (RNMG)
- Round (RPGA)
- Square (SCGT)
- Square (SCMA)
- Square (SCMT)
- Square (SCMW)
- Square (SCMX)
- Square (SNEW)
- Square (SNG)
- Square (SNGA)
- Square (SNGG)
- Square (SNMA)
- Square (SNML)
- Square (SNMM)
- Square (SNMN)
- Square (SNMR)
- Square (SNMX)
- Square (SNPL)
- Square (SNPR)
- Square (SOMX)
- Square (SPG)
- Square (SPGA)
- Square (SPGG)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Triangle (TBGE)
- Triangle (TBGT)
- Triangle (TBGW)
- Triangle (TBMT)
- Triangle (TCGA)
- Triangle (TCGT)
- Triangle (TCGW)
- Triangle (TCMA)
- Triangle (TCMT)
- Triangle (TCMW)
- Triangle (TCMX)
- Triangle (TEEN)
- Triangle (TEGE)
- Triangle (TEGN)
- Triangle (TEGX)
- Triangle (TNG)
- Triangle (TNGA)
- Triangle (TNGG)
- Triangle (TNGM)
- Triangle (TNMA)
- Triangle (TNMC)
- Triangle (TNML)
- Triangle (TNMM)
- Triangle (TNMN)
- Triangle (TNMR)
- Triangle (TNMU)
- Triangle (TNMX)
- Triangle (TNPL)
- Triangle (TNPR)
- Triangle (TPEW)
- Triangle (TPG)
- Triangle (TPGA)
- Triangle (TPGB)
- Triangle (TPGD)
- Triangle (TPGG)
- Triangle (TPGH)
- Triangle (TPGT)
- Triangle (TPGW)
- Triangle (TPGX)
- Triangle (TPMA)
- Triangle (TPMH)
- Triangle (TPMN)
- Triangle (TPMR)
- Triangle (TPMT)
- Triangle (TPMX)
- Triangle (TRM)
- Triangle (TUE)
- Trigon 80° (WBED)
- Trigon 80° (WBGT)
- Trigon 80° (WBMT)
- Trigon 80° (WBMX)
- Trigon 80° (WCGT)
- Trigon 80° (WCMT)
- Trigon 80° (WDXT)
- Trigon 80° (WNGA)
- Trigon 80° (WNGG)
- Trigon 80° (WNMA)
- Trigon 80° (WPMT)
- Grooving Inserts
- Milling Inserts
- Irregular arc edge
- Irregular arc edge (XDLT)
- Irregular arc edge (XDPT)
- Octagonal
- Octagonal (ODHT)
- Octagonal (ODMT)
- Octagonal (ODMW)
- Octagonal (OECR)
- Octagonal (OEMT)
- Octagonal (OEMX)
- Octagonal (OFCR)
- Octagonal (OFCT)
- Octagonal (OFEN)
- Octagonal (OFER)
- Octagonal (OFET)
- Octagonal (OFEX)
- Octagonal (OFKR)
- Octagonal (OFKT)
- Octagonal (OFMR)
- Octagonal (OFMT)
- Octagonal (OFMW)
- Octagonal (ONCU)
- Octagonal (ONEF)
- Octagonal (ONET)
- Octagonal (ONGU)
- Octagonal (ONHU)
- Octagonal (ONMF)
- Octagonal (ONMT)
- Octagonal (ONMU)
- Octagonal (ONMX)
- Octagonal (ONPX)
- Octagonal (OWHT)
- Octagonal (OWMT)
- Octagonal (OXMT)
- Parallelogram 75°
- Parallelogram 80°
- Parallelogram 82°
- Parallelogram 85°
- Parallelogram 85° (ADCT)
- Parallelogram 85° (ADEH)
- Parallelogram 85° (ADGT)
- Parallelogram 85° (ADKR)
- Parallelogram 85° (ADKT)
- Parallelogram 85° (ADMT)
- Parallelogram 85° (AEMW)
- Parallelogram 85° (ANGX)
- Parallelogram 85° (ANHX)
- Parallelogram 85° (AOMT)
- Parallelogram 85° (APCR)
- Parallelogram 85° (APCT)
- Parallelogram 85° (APET)
- Parallelogram 85° (APFT)
- Parallelogram 85° (APGT)
- Parallelogram 85° (APHT)
- Parallelogram 85° (APKR)
- Parallelogram 85° (APKT)
- Parallelogram 85° (APKX)
- Parallelogram 85° (APLX)
- Parallelogram 85° (APPT)
- Parallelogram 85° (APXT)
- Parallelogram 85° (AXMT)
- Parallelogram 85° (APMT)
- Parallelogram 88°
- Parallelogram 90°
- Rectangular
- Rectangular (LBMC)
- Rectangular (LCGX)
- Rectangular (LCMF)
- Rectangular (LCMR)
- Rectangular (LCMT)
- Rectangular (LCMX)
- Rectangular (LMMU)
- Rectangular (LNAT)
- Rectangular (LNCQ)
- Rectangular (LNEG)
- Rectangular (LNET)
- Rectangular (LNEX)
- Rectangular (LNGX)
- Rectangular (LNHQ)
- Rectangular (LNHT)
- Rectangular (LNHU)
- Rectangular (LNKT)
- Rectangular (LNKW)
- Rectangular (LNKX)
- Rectangular (LNMN)
- Rectangular (LNMT)
- Rectangular (LNMU)
- Rectangular (LNMX)
- Rectangular (LNUX)
- Rectangular (LOEX)
- Rectangular (LOGT)
- Rectangular (LOGU)
- Rectangular (LOGUO)
- Rectangular (LOHT)
- Rectangular (LOHW)
- Rectangular (LOMU)
- Rectangular (LPET)
- Rectangular (LPGT)
- Rectangular (LPHT)
- Rectangular (LPHW)
- Rectangular (LPKT)
- Rectangular (LPKW)
- Rectangular (LPMW)
- Rectangular (LPNT)
- Rectangular (LQMU)
- Rectangular (LSMT)
- Rectangular (LXMU)
- Rectangular (ZDET)
- Round
- Round (RBET)
- Round (RCGT)
- Round (RCGX)
- Round (RCHT)
- Round (RCKT)
- Round (RCMM)
- Round (RCMT)
- Round (RCMX)
- Round (RDFG)
- Round (RDGT)
- Round (RDHW)
- Round (RDHX)
- Round (RDKT)
- Round (RDKW)
- Round (RDMT)
- Round (RDMW)
- Round (RDMX)
- Round (REMT)
- Round (RNGN)
- Round (ROMT)
- Round (ROMU)
- Round (ROUND)
- Round (RPEW)
- Round (RPGT)
- Round (RPMT)
- Round (RXMT)
- Round (RXMX)
- Round (RYMX)
- Round (RCMW)
- Round (RPMW)
- Square
- Square (SCMT)
- Square (SDCT)
- Square (SDET)
- Square (SDKN)
- Square (SDKR)
- Square (SDKW)
- Square (SDMR)
- Square (SDMT)
- Square (SDMW)
- Square (SDXN)
- Square (SECR)
- Square (SEEN)
- Square (SEER)
- Square (SEET)
- Square (SEEW)
- Square (SEGT)
- Square (SEHT)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEKW)
- Square (SEMM)
- Square (SEMR)
- Square (SEMT)
- Square (SEMW)
- Square (SEXT)
- Square (SFCN)
- Square (SKET)
- Square (SNCU)
- Square (SNEG)
- Square (SNEU)
- Square (SNEX)
- Square (SNGX)
- Square (SNKN)
- Square (SNMN)
- Square (SNMT)
- Square (SNMX)
- Square (SNUN)
- Square (SOMT)
- Square (SPCH)
- Square (SPCN)
- Square (SPCT)
- Square (SPCW)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPHT)
- Square (SPKN)
- Square (SPKR)
- Square (SPKT)
- Square (SPKW)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPRN)
- Square (SPUN)
- Square (STHX)
- Square (TEKN)
- Square (SDKT)
- Square (SNMU)
- Square (SNHX)
- Square (SPHX)
- Triangle
- Trigon
- Trigon (WOEJ)
- Drill & Mill Combo Insert (QOGT)
- Drill & Mill Combo Insert (QOMT)
- Face Milling Insert (2NGU)
- Face Milling Insert (6NGU)
- Face Milling Insert (6NMU)
- Grooving Milling Insert (AOGT)
- Grooving Milling Insert (AOMT)
- High Feed Radius Milling Insert (ENMU)
- High Feed Radius Milling Insert (JPGX)
- High Feed Radius Milling Insert (JPMX)
- High Speed Face Milling Insert (NNMQ)
- High Speed Face Milling Insert (NNMU)
- Irregular arc edge (XCP)
- Irregular arc edge (XDCW)
- Irregular arc edge (XDET)
- Irregular arc edge (XDGT)
- Irregular arc edge (XDGX)
- Irregular arc edge (XDHX)
- Irregular arc edge (XDLW)
- Irregular arc edge (XDMT)
- Irregular arc edge (XDPW)
- Irregular arc edge (XDPX)
- Irregular arc edge (XEET)
- Irregular arc edge (XELT)
- Irregular arc edge (XELW)
- Irregular arc edge (XEPW)
- Irregular arc edge (XNGJ)
- Irregular arc edge (XNMU)
- Irregular arc edge (XNXF)
- Irregular arc edge (XOGU)
- Irregular arc edge (XOHT)
- Irregular arc edge (XOMT)
- Irregular arc edge (XPCW)
- Irregular arc edge (XPET)
- Irregular arc edge (XPLT)
- Irregular arc edge (XPMT)
- Irregular arc edge (XPNT)
- Micro Internal Grooving Insert
- Multi-edge Face Milling Insert (LNHX)
- Multi-edge Face Milling Insert (LNMX)
- Multi-edge Face Milling Insert (LOGU)
- Octagonal (ODET)
- Octagonal (ODPT)
- Octagonal (OFPT)
- Octagonal (ONEC)
- Octagonal (ONGX)
- Parallelogram (JOMT)
- Parallelogram 55° (KNUX)
- Parallelogram 75° (EDCT)
- Parallelogram 75° (EDPT)
- Parallelogram 80° (CCMX)
- Parallelogram 80° (CDE)
- Parallelogram 80° (CNHQ)
- Parallelogram 80° (CNHU)
- Parallelogram 80° (CPMT)
- Parallelogram 80° (HDHN)
- Parallelogram 80° (HNEC)
- Parallelogram 80° (HNEN)
- Parallelogram 80° (HNGF)
- Parallelogram 80° (HNGJ)
- Parallelogram 80° (HNHX)
- Parallelogram 80° (HNPX)
- Parallelogram 82° (BDHX)
- Parallelogram 82° (BGHX)
- Parallelogram 82° (BPHX)
- Parallelogram 85° (ACET)
- Parallelogram 85° (ADPT)
- Parallelogram 85° (ANGT)
- Parallelogram 85° (APFX)
- Parallelogram 85° (APMT)
- Parallelogram 88° (GD)
- Parallelogram 88° (GDXMP)
- Parallelogram 90° (LFEW)
- Parallelogram 90° (LNCX)
- Parallelogram 90° (LNE)
- Parallelogram 90° (LNEQ)
- Parallelogram 90° (LNGQ)
- Parallelogram 90° (LNPQ)
- Parallelogram 90° (LNPU)
- Parallelogram 90° (LPE)
- Parallelogram 90° (MDHX)
- Parallelogram 90° (PDHX)
- Parallelogram 90° (YCE)
- Rectangular (K90BPD)
- Rectangular (ZDET)
- Round (RDCW)
- Round (RDPX)
- Round (REHR)
- Round (RFCW)
- Round (RFHN)
- Round (RIR)
- Round (RNGJ)
- Round (RNPJ)
- Round (RPCW)
- Round (RPET)
- Round (RPEX)
- Round (RPGB)
- Round (RPGN)
- Round (RPHT)
- Round (RPMT)
- Round (RPMW)
- Round (RPPT)
- Round (RXCR)
- Round (SRM)
- Semicircle (KDMB)
- Semicircle (KDMS)
- Semicircle (KDMT)
- Semicircle (KEGT)
- Semicircle (KGIP)
- Semicircle (KSDR)
- Special for High Speed Face Milling (GOEN)
- Special for High Speed Face Milling (GOER)
- Square (SDCH)
- Square (SDCN)
- Square (SDCW)
- Square (SDEB)
- Square (SDHN)
- Square (SDPT)
- Square (SEAN)
- Square (SECT)
- Square (SECW)
- Square (SECX)
- Square (SEER)
- Square (SEET)
- Square (SEGN)
- Square (SEGT)
- Square (SEHW)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEMT)
- Square (SEPR)
- Square (SEPT)
- Square (SNGN)
- Square (SNHJ)
- Square (SNKN)
- Square (SNMU)
- Square (SNPJ)
- Square (SNXF)
- Square (SOET)
- Square (SOGT)
- Square (SOMT)
- Square (SONX)
- Square (SPCB)
- Square (SPCH)
- Square (SPCT)
- Square (SPCW)
- Square (SPEB)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPGX)
- Square (SPKN)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPPT)
- Square (SPUN)
- Square Round Nose Finishing Insert (ZCFW)
- Triangle (TNHF)
- Triangle (TNHN)
- Triangle (TPEW)
- Triangle (TPGN)
- Triangle (TPKN)
- Triangular High Feed Milling Insert (JDMT)
- Triangular High Feed Milling Insert (JDMU)
- Triangular High Feed Milling Insert (JDMW)
- Trigon (WEEW)
- Trigon (WNEU)
- Trigon (WNGU)
- Trigon (WOEX)
- Trigon (WPGX)
- Trigon (WPMT)
- Trigon (WPMW)
- Universal Shoulder Milling Insert (MPMX)
- Measurings
- Reamers
- Taps
- Tool Holder
Kennametal KC5010 Carbide Grooving/Parting Insert Parallelogram 55° Non-ferrous NG3062L
$43.90
The Kennametal KC5010 is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: NG3062L KC5010.
Kennametal grade — recommended for cast iron (K).
Recommended cutting data
Group K — Cast iron
- Grey iron (HB ≤ 240)
Vc: 120–280 m/min; f: 0.15–0.50 mm/rev; ap ≤ 4.0 mm - Ductile / nodular iron (HB 200–300)
Vc: 100–220 m/min; f: 0.12–0.40 mm/rev; ap ≤ 3.0 mm
Dry or minimal coolant works; mind the entry impact.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
500 in stock
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Kennametal |
|---|---|
| Part No. (MPN) | NG3062L |
| Grade | KC5010 |
| Shape | Parallelogram 55° |
| Category | Grooving & Parting Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Kennametal XDLT120512ERD411 Steel KCSM40 XDLT443 XDLT120612
$55.10Add to cartThe Kennametal XDLT443 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: XDLT120512ERD411 KCSM40.
-
Kennametal CNMG120404F Diamond 80° K10P CNMG431
$23.38Add to cartThe Kennametal CNMG431 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: CNMG120404F K10P.
-
Kennametal EP1004EHD Diamond 75° EDPT10T304PDERHD KCPM40 EDPT321 EDPT090304
$31.43Add to cartThe Kennametal EDPT321 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: EDPT10T304PDERHD KCPM40.
-
Kennametal RNGN45S0825 Round Steel KYHK15B
$28.04Add to cartThe Kennametal RNGN45S0825 KYHK15B is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: RNGN45S0825 KYHK15B.
More from Kennametal
-
Kennametal KC5010 Parallelogram 55° Steel VNGG331FS VNGG160404
$40.72Add to cartThe Kennametal KC5010 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: VNGG331FS KC5010.
-
Kennametal KC522M Parallelogram 55° Steel RDPX12T3M0SHP KC522M
$23.77Add to cartThe Kennametal RDPX12T3M0SHP KC522M is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: RDPX12T3M0SHP KC522M.
-
Kennametal ER0600M06P00GUP Carbide Grooving/Parting Insert Diamond 75° KCU10B
$32.16Add to cartThe Kennametal ER0600M06P00GUP KCU10B is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: ER0600M06P00GUP KCU10B.
-
Kennametal A4R250I06P00GUP KCU25 Carbide Grooving/Parting Insert Parallelogram 85° Steel KCU25B
$50.14Add to cartThe Kennametal A4R250I06P00GUP KCU25B is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: A4R250I06P00GUP KCU25B.
-
Kennametal KY3500 Parallelogram 55° SPHX15T6ZCTRGP4SK KY3500
$53.62Add to cartThe Kennametal KY3500 is a professional-grade carbide tool designed for general CNC turning and machining operations. Suitable for use on CNC lathes and machining centers with appropriate tool holders. Recommended for production environments where consistent surface finish and dimensional accuracy are critical. For optimal results, use with through-coolant or high-pressure coolant delivery. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SPHX15T6ZCTRGP4SK KY3500.
-
Kennametal NR4125LK Carbide Grooving/Parting Insert KCU10B
$62.52Add to cartThe Kennametal NR4125LK KCU10B is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: NR4125LK KCU10B.
-
Kennametal NG3156R KCU25 Carbide Grooving/Parting Insert Steel KCU25B
$39.16Add to cartThe Kennametal NG3156R KCU25B is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: NG3156R KCU25B.
-
Kennametal NG3189RK Carbide Grooving/Parting Insert Steel KCP10B
$43.68Add to cartThe Kennametal NG3189RK KCP10B is a professional-grade carbide insert designed for grooving and parting-off operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: NG3189RK KCP10B.












