Category
- Uncategorized
- Accessory
- Borings
- Drills
- EndMills
- Insert
- Brazed / Welding Inserts
- Drilling Inserts
- Grooving & Parting Inserts
- Threading Inserts
- Turning Inserts
- Diamond 55° (DNMG)
- Diamond 80° (CNMG)
- Parallelogram 55° (KNUX)
- Pentagon (PNMA)
- Rhombic 35° (VNMG)
- Round (RCMT)
- Square (SNMG)
- Triangle (TNMG)
- Trigon 80° (WNMG)
- Back turning insert (ABS)
- Diamond 25° (XCGT)
- Diamond 25° (XCMT)
- Diamond 25° (XPGT)
- Diamond 55° (DCET)
- Diamond 55° (DCGA)
- Diamond 55° (DCGT)
- Diamond 55° (DCGW)
- Diamond 55° (DCMA)
- Diamond 55° (DCMT)
- Diamond 55° (DCMW)
- Diamond 55° (DCMX)
- Diamond 55° (DEGX)
- Diamond 55° (DNG)
- Diamond 55° (DNGA)
- Diamond 55° (DNGG)
- Diamond 55° (DNGM)
- Diamond 55° (DNJG)
- Diamond 55° (DNMA)
- Diamond 55° (DNML)
- Diamond 55° (DNMM)
- Diamond 55° (DNMR)
- Diamond 55° (DNMX)
- Diamond 55° (DPGT)
- Diamond 55° (DPMT)
- Diamond 55° (NMG)
- Diamond 80° (CCET)
- Diamond 80° (CCEW)
- Diamond 80° (CCGA)
- Diamond 80° (CCGE)
- Diamond 80° (CCGH)
- Diamond 80° (CCGT)
- Diamond 80° (CCGW)
- Diamond 80° (CCMA)
- Diamond 80° (CCMH)
- Diamond 80° (CCMT)
- Diamond 80° (CCMW)
- Diamond 80° (CCMX)
- Diamond 80° (CNG)
- Diamond 80° (CNGA)
- Diamond 80° (CNGG)
- Diamond 80° (CNGM)
- Diamond 80° (CNGP)
- Diamond 80° (CNGX)
- Diamond 80° (CNMA)
- Diamond 80° (CNMM)
- Diamond 80° (CNMN)
- Diamond 80° (CNMP)
- Diamond 80° (CNMU)
- Diamond 80° (CNMX)
- Diamond 80° (CPEW)
- Diamond 80° (CPG)
- Diamond 80° (CPGA)
- Diamond 80° (CPGB)
- Diamond 80° (CPGT)
- Diamond 80° (CPMA)
- Diamond 80° (CPMB)
- Diamond 80° (CPMH)
- Diamond 80° (CPMT)
- Diamond 80° (CPMX)
- Double-sided Double-edge General Grooving Insert
- Double-Sided Two Edges Grooving & Parting Insert
- Micro Mini Twin
- Mini Cut-off Insert
- Mini Precision Grooving & Parting Insert
- Mini Single Edge External Grooving Part-off Insert
- Mini Single Edge Parting
- Multi-Directional
- Narrow Slot Single Tip
- Partial Tip CBN Insert
- Rhombic 35° (PBVBW)
- Rhombic 35° (PBVC)
- Rhombic 35° (PBVG)
- Rhombic 35° (VBET)
- Rhombic 35° (VBGA)
- Rhombic 35° (VBGT)
- Rhombic 35° (VBGW)
- Rhombic 35° (VBMA)
- Rhombic 35° (VBMT)
- Rhombic 35° (VCET)
- Rhombic 35° (VCGA)
- Rhombic 35° (VCGT)
- Rhombic 35° (VCGW)
- Rhombic 35° (VCMA)
- Rhombic 35° (VCMT)
- Rhombic 35° (VCMX)
- Rhombic 35° (VDGX)
- Rhombic 35° (VNGA)
- Rhombic 35° (VNGG)
- Rhombic 35° (VNGM)
- Rhombic 35° (VNMA)
- Rhombic 35° (VPET)
- Rhombic 35° (VPGT)
- Rhombic 35° (VPMA)
- Round (RCGT)
- Round (RCGX)
- Round (RCMX)
- Round (RNG)
- Round (RNMA)
- Round (RNMG)
- Round (RPGA)
- Square (SCGT)
- Square (SCMA)
- Square (SCMT)
- Square (SCMW)
- Square (SCMX)
- Square (SNEW)
- Square (SNG)
- Square (SNGA)
- Square (SNGG)
- Square (SNMA)
- Square (SNML)
- Square (SNMM)
- Square (SNMN)
- Square (SNMR)
- Square (SNMX)
- Square (SNPL)
- Square (SNPR)
- Square (SOMX)
- Square (SPG)
- Square (SPGA)
- Square (SPGG)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Triangle (TBGE)
- Triangle (TBGT)
- Triangle (TBGW)
- Triangle (TBMT)
- Triangle (TCGA)
- Triangle (TCGT)
- Triangle (TCGW)
- Triangle (TCMA)
- Triangle (TCMT)
- Triangle (TCMW)
- Triangle (TCMX)
- Triangle (TEEN)
- Triangle (TEGE)
- Triangle (TEGN)
- Triangle (TEGX)
- Triangle (TNG)
- Triangle (TNGA)
- Triangle (TNGG)
- Triangle (TNGM)
- Triangle (TNMA)
- Triangle (TNMC)
- Triangle (TNML)
- Triangle (TNMM)
- Triangle (TNMN)
- Triangle (TNMR)
- Triangle (TNMU)
- Triangle (TNMX)
- Triangle (TNPL)
- Triangle (TNPR)
- Triangle (TPEW)
- Triangle (TPG)
- Triangle (TPGA)
- Triangle (TPGB)
- Triangle (TPGD)
- Triangle (TPGG)
- Triangle (TPGH)
- Triangle (TPGT)
- Triangle (TPGW)
- Triangle (TPGX)
- Triangle (TPMA)
- Triangle (TPMH)
- Triangle (TPMN)
- Triangle (TPMR)
- Triangle (TPMT)
- Triangle (TPMX)
- Triangle (TRM)
- Triangle (TUE)
- Trigon 80° (WBED)
- Trigon 80° (WBGT)
- Trigon 80° (WBMT)
- Trigon 80° (WBMX)
- Trigon 80° (WCGT)
- Trigon 80° (WCMT)
- Trigon 80° (WDXT)
- Trigon 80° (WNGA)
- Trigon 80° (WNGG)
- Trigon 80° (WNMA)
- Trigon 80° (WPMT)
- Grooving Inserts
- Milling Inserts
- Irregular arc edge
- Irregular arc edge (XDLT)
- Irregular arc edge (XDPT)
- Octagonal
- Octagonal (ODHT)
- Octagonal (ODMT)
- Octagonal (ODMW)
- Octagonal (OECR)
- Octagonal (OEMT)
- Octagonal (OEMX)
- Octagonal (OFCR)
- Octagonal (OFCT)
- Octagonal (OFEN)
- Octagonal (OFER)
- Octagonal (OFET)
- Octagonal (OFEX)
- Octagonal (OFKR)
- Octagonal (OFKT)
- Octagonal (OFMR)
- Octagonal (OFMT)
- Octagonal (OFMW)
- Octagonal (ONCU)
- Octagonal (ONEF)
- Octagonal (ONET)
- Octagonal (ONGU)
- Octagonal (ONHU)
- Octagonal (ONMF)
- Octagonal (ONMT)
- Octagonal (ONMU)
- Octagonal (ONMX)
- Octagonal (ONPX)
- Octagonal (OWHT)
- Octagonal (OWMT)
- Octagonal (OXMT)
- Parallelogram 75°
- Parallelogram 80°
- Parallelogram 82°
- Parallelogram 85°
- Parallelogram 85° (ADCT)
- Parallelogram 85° (ADEH)
- Parallelogram 85° (ADGT)
- Parallelogram 85° (ADKR)
- Parallelogram 85° (ADKT)
- Parallelogram 85° (ADMT)
- Parallelogram 85° (AEMW)
- Parallelogram 85° (ANGX)
- Parallelogram 85° (ANHX)
- Parallelogram 85° (AOMT)
- Parallelogram 85° (APCR)
- Parallelogram 85° (APCT)
- Parallelogram 85° (APET)
- Parallelogram 85° (APFT)
- Parallelogram 85° (APGT)
- Parallelogram 85° (APHT)
- Parallelogram 85° (APKR)
- Parallelogram 85° (APKT)
- Parallelogram 85° (APKX)
- Parallelogram 85° (APLX)
- Parallelogram 85° (APPT)
- Parallelogram 85° (APXT)
- Parallelogram 85° (AXMT)
- Parallelogram 85° (APMT)
- Parallelogram 88°
- Parallelogram 90°
- Rectangular
- Rectangular (LBMC)
- Rectangular (LCGX)
- Rectangular (LCMF)
- Rectangular (LCMR)
- Rectangular (LCMT)
- Rectangular (LCMX)
- Rectangular (LMMU)
- Rectangular (LNAT)
- Rectangular (LNCQ)
- Rectangular (LNEG)
- Rectangular (LNET)
- Rectangular (LNEX)
- Rectangular (LNGX)
- Rectangular (LNHQ)
- Rectangular (LNHT)
- Rectangular (LNHU)
- Rectangular (LNKT)
- Rectangular (LNKW)
- Rectangular (LNKX)
- Rectangular (LNMN)
- Rectangular (LNMT)
- Rectangular (LNMU)
- Rectangular (LNMX)
- Rectangular (LNUX)
- Rectangular (LOEX)
- Rectangular (LOGT)
- Rectangular (LOGU)
- Rectangular (LOGUO)
- Rectangular (LOHT)
- Rectangular (LOHW)
- Rectangular (LOMU)
- Rectangular (LPET)
- Rectangular (LPGT)
- Rectangular (LPHT)
- Rectangular (LPHW)
- Rectangular (LPKT)
- Rectangular (LPKW)
- Rectangular (LPMW)
- Rectangular (LPNT)
- Rectangular (LQMU)
- Rectangular (LSMT)
- Rectangular (LXMU)
- Rectangular (ZDET)
- Round
- Round (RBET)
- Round (RCGT)
- Round (RCGX)
- Round (RCHT)
- Round (RCKT)
- Round (RCMM)
- Round (RCMT)
- Round (RCMX)
- Round (RDFG)
- Round (RDGT)
- Round (RDHW)
- Round (RDHX)
- Round (RDKT)
- Round (RDKW)
- Round (RDMT)
- Round (RDMW)
- Round (RDMX)
- Round (REMT)
- Round (RNGN)
- Round (ROMT)
- Round (ROMU)
- Round (ROUND)
- Round (RPEW)
- Round (RPGT)
- Round (RPMT)
- Round (RXMT)
- Round (RXMX)
- Round (RYMX)
- Round (RCMW)
- Round (RPMW)
- Square
- Square (SCMT)
- Square (SDCT)
- Square (SDET)
- Square (SDKN)
- Square (SDKR)
- Square (SDKW)
- Square (SDMR)
- Square (SDMT)
- Square (SDMW)
- Square (SDXN)
- Square (SECR)
- Square (SEEN)
- Square (SEER)
- Square (SEET)
- Square (SEEW)
- Square (SEGT)
- Square (SEHT)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEKW)
- Square (SEMM)
- Square (SEMR)
- Square (SEMT)
- Square (SEMW)
- Square (SEXT)
- Square (SFCN)
- Square (SKET)
- Square (SNCU)
- Square (SNEG)
- Square (SNEU)
- Square (SNEX)
- Square (SNGX)
- Square (SNKN)
- Square (SNMN)
- Square (SNMT)
- Square (SNMX)
- Square (SNUN)
- Square (SOMT)
- Square (SPCH)
- Square (SPCN)
- Square (SPCT)
- Square (SPCW)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPHT)
- Square (SPKN)
- Square (SPKR)
- Square (SPKT)
- Square (SPKW)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPRN)
- Square (SPUN)
- Square (STHX)
- Square (TEKN)
- Square (SDKT)
- Square (SNMU)
- Square (SNHX)
- Square (SPHX)
- Triangle
- Trigon
- Trigon (WOEJ)
- Drill & Mill Combo Insert (QOGT)
- Drill & Mill Combo Insert (QOMT)
- Face Milling Insert (2NGU)
- Face Milling Insert (6NGU)
- Face Milling Insert (6NMU)
- Grooving Milling Insert (AOGT)
- Grooving Milling Insert (AOMT)
- High Feed Radius Milling Insert (ENMU)
- High Feed Radius Milling Insert (JPGX)
- High Feed Radius Milling Insert (JPMX)
- High Speed Face Milling Insert (NNMQ)
- High Speed Face Milling Insert (NNMU)
- Irregular arc edge (XCP)
- Irregular arc edge (XDCW)
- Irregular arc edge (XDET)
- Irregular arc edge (XDGT)
- Irregular arc edge (XDGX)
- Irregular arc edge (XDHX)
- Irregular arc edge (XDLW)
- Irregular arc edge (XDMT)
- Irregular arc edge (XDPW)
- Irregular arc edge (XDPX)
- Irregular arc edge (XEET)
- Irregular arc edge (XELT)
- Irregular arc edge (XELW)
- Irregular arc edge (XEPW)
- Irregular arc edge (XNGJ)
- Irregular arc edge (XNMU)
- Irregular arc edge (XNXF)
- Irregular arc edge (XOGU)
- Irregular arc edge (XOHT)
- Irregular arc edge (XOMT)
- Irregular arc edge (XPCW)
- Irregular arc edge (XPET)
- Irregular arc edge (XPLT)
- Irregular arc edge (XPMT)
- Irregular arc edge (XPNT)
- Micro Internal Grooving Insert
- Multi-edge Face Milling Insert (LNHX)
- Multi-edge Face Milling Insert (LNMX)
- Multi-edge Face Milling Insert (LOGU)
- Octagonal (ODET)
- Octagonal (ODPT)
- Octagonal (OFPT)
- Octagonal (ONEC)
- Octagonal (ONGX)
- Parallelogram (JOMT)
- Parallelogram 55° (KNUX)
- Parallelogram 75° (EDCT)
- Parallelogram 75° (EDPT)
- Parallelogram 80° (CCMX)
- Parallelogram 80° (CDE)
- Parallelogram 80° (CNHQ)
- Parallelogram 80° (CNHU)
- Parallelogram 80° (CPMT)
- Parallelogram 80° (HDHN)
- Parallelogram 80° (HNEC)
- Parallelogram 80° (HNEN)
- Parallelogram 80° (HNGF)
- Parallelogram 80° (HNGJ)
- Parallelogram 80° (HNHX)
- Parallelogram 80° (HNPX)
- Parallelogram 82° (BDHX)
- Parallelogram 82° (BGHX)
- Parallelogram 82° (BPHX)
- Parallelogram 85° (ACET)
- Parallelogram 85° (ADPT)
- Parallelogram 85° (ANGT)
- Parallelogram 85° (APFX)
- Parallelogram 85° (APMT)
- Parallelogram 88° (GD)
- Parallelogram 88° (GDXMP)
- Parallelogram 90° (LFEW)
- Parallelogram 90° (LNCX)
- Parallelogram 90° (LNE)
- Parallelogram 90° (LNEQ)
- Parallelogram 90° (LNGQ)
- Parallelogram 90° (LNPQ)
- Parallelogram 90° (LNPU)
- Parallelogram 90° (LPE)
- Parallelogram 90° (MDHX)
- Parallelogram 90° (PDHX)
- Parallelogram 90° (YCE)
- Rectangular (K90BPD)
- Rectangular (ZDET)
- Round (RDCW)
- Round (RDPX)
- Round (REHR)
- Round (RFCW)
- Round (RFHN)
- Round (RIR)
- Round (RNGJ)
- Round (RNPJ)
- Round (RPCW)
- Round (RPET)
- Round (RPEX)
- Round (RPGB)
- Round (RPGN)
- Round (RPHT)
- Round (RPMT)
- Round (RPMW)
- Round (RPPT)
- Round (RXCR)
- Round (SRM)
- Semicircle (KDMB)
- Semicircle (KDMS)
- Semicircle (KDMT)
- Semicircle (KEGT)
- Semicircle (KGIP)
- Semicircle (KSDR)
- Special for High Speed Face Milling (GOEN)
- Special for High Speed Face Milling (GOER)
- Square (SDCH)
- Square (SDCN)
- Square (SDCW)
- Square (SDEB)
- Square (SDHN)
- Square (SDPT)
- Square (SEAN)
- Square (SECT)
- Square (SECW)
- Square (SECX)
- Square (SEER)
- Square (SEET)
- Square (SEGN)
- Square (SEGT)
- Square (SEHW)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEMT)
- Square (SEPR)
- Square (SEPT)
- Square (SNGN)
- Square (SNHJ)
- Square (SNKN)
- Square (SNMU)
- Square (SNPJ)
- Square (SNXF)
- Square (SOET)
- Square (SOGT)
- Square (SOMT)
- Square (SONX)
- Square (SPCB)
- Square (SPCH)
- Square (SPCT)
- Square (SPCW)
- Square (SPEB)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPGX)
- Square (SPKN)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPPT)
- Square (SPUN)
- Square Round Nose Finishing Insert (ZCFW)
- Triangle (TNHF)
- Triangle (TNHN)
- Triangle (TPEW)
- Triangle (TPGN)
- Triangle (TPKN)
- Triangular High Feed Milling Insert (JDMT)
- Triangular High Feed Milling Insert (JDMU)
- Triangular High Feed Milling Insert (JDMW)
- Trigon (WEEW)
- Trigon (WNEU)
- Trigon (WNGU)
- Trigon (WOEX)
- Trigon (WPGX)
- Trigon (WPMT)
- Trigon (WPMW)
- Universal Shoulder Milling Insert (MPMX)
- Measurings
- Reamers
- Taps
- Tool Holder
Mitsubishi RCMT0803M0 MP9015 Round Heat-resistant
$16.70
The Mitsubishi MP9015 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: RCMT0803M0 MP9015.
Mitsubishi grade — recommended for stainless steel (M).
Recommended cutting data
Group M — Stainless steel
- Ferritic / martensitic (HB ≤ 220)
Vc: 120–200 m/min; f: 0.08–0.30 mm/rev; ap ≤ 3.0 mm - Austenitic 304 / 316 (work-hardening)
Vc: 90–160 m/min; f: 0.08–0.25 mm/rev; ap ≤ 2.5 mm
Flood coolant; avoid too low a feed to prevent work hardening.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Mitsubishi |
|---|---|
| Part No. (MPN) | RCMT0803M0 |
| Grade | MP9015 |
| Shape | Round |
| Category | Turning Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Mitsubishi VCMT221LM MC7025 Diamond 35° Steel VCMT110304
$40.26Add to cartThe Mitsubishi MC7025 is a professional-grade carbide insert designed for carbon and alloy steel turning. Mitsubishi MC7025 premium CVD grade for heavy interrupted steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: VCMT221LM MC7025.
-
Mitsubishi SNMG643RM MC7125 Square Steel SNMG190612
$43.57Add to cartThe Mitsubishi MC7125 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SNMG643RM MC7125.
-
Mitsubishi VBGT110302R-F NX2525 Diamond 35° Steel VBGT220 VBGT110300
$24.71Add to cartThe Mitsubishi NX2525 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: VBGT110302R-F NX2525.
More from Mitsubishi
-
Mitsubishi TPMH321LP MC6135 Triangle Steel TPMH160304
$23.78Add to cartThe Mitsubishi MC6135 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TPMH321LP MC6135.
-
Mitsubishi CCMT21.52MW NX2525 Diamond 80° Steel CCMT060208 CCMT212
$15.87Add to cartThe Mitsubishi NX2525 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: CCMT21.52MW NX2525.
-
Mitsubishi TCMT21.50.5LP MC6115 Triangle TCMT110202 TCMT410
$18.18Add to cartThe Mitsubishi MC6115 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TCMT21.50.5LP MC6115.
-
Mitsubishi MMT16IR140BSPT-S VP15TF Diamond 86° Steel
$22.81Add to cartThe Mitsubishi MMT16IR140BSPT-S VP15TF is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: MMT16IR140BSPT-S VP15TF.
-
Mitsubishi 6NGU0906040PNER-L MP9130 Titanium
$38.46Add to cartThe Mitsubishi MP9130 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: 6NGU0906040PNER-L MP9130.
-
Mitsubishi DCMT32.52MP MC6115 Diamond 55° Steel DCMT11T308 DCMT322
$31.28Add to cartThe Mitsubishi MC6115 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: DCMT32.52MP MC6115.
-
Mitsubishi CNMG643GK MC5125 Diamond 80° CNMG190612
$41.01Add to cartThe Mitsubishi MC5125 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: CNMG643GK MC5125.
-
Mitsubishi CNMG432SA NX3035 Diamond 80° Steel CNMG120408
$16.82Add to cartThe Mitsubishi NX3035 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: CNMG432SA NX3035.












