Category
- Uncategorized
- Accessory
- Borings
- Drills
- EndMills
- Insert
- Brazed / Welding Inserts
- Drilling Inserts
- Grooving & Parting Inserts
- Threading Inserts
- Turning Inserts
- Diamond 55° (DNMG)
- Diamond 80° (CNMG)
- Parallelogram 55° (KNUX)
- Pentagon (PNMA)
- Rhombic 35° (VNMG)
- Round (RCMT)
- Square (SNMG)
- Triangle (TNMG)
- Trigon 80° (WNMG)
- Back turning insert (ABS)
- Diamond 25° (XCGT)
- Diamond 25° (XCMT)
- Diamond 25° (XPGT)
- Diamond 55° (DCET)
- Diamond 55° (DCGA)
- Diamond 55° (DCGT)
- Diamond 55° (DCGW)
- Diamond 55° (DCMA)
- Diamond 55° (DCMT)
- Diamond 55° (DCMW)
- Diamond 55° (DCMX)
- Diamond 55° (DEGX)
- Diamond 55° (DNG)
- Diamond 55° (DNGA)
- Diamond 55° (DNGG)
- Diamond 55° (DNGM)
- Diamond 55° (DNJG)
- Diamond 55° (DNMA)
- Diamond 55° (DNML)
- Diamond 55° (DNMM)
- Diamond 55° (DNMR)
- Diamond 55° (DNMX)
- Diamond 55° (DPGT)
- Diamond 55° (DPMT)
- Diamond 55° (NMG)
- Diamond 80° (CCET)
- Diamond 80° (CCEW)
- Diamond 80° (CCGA)
- Diamond 80° (CCGE)
- Diamond 80° (CCGH)
- Diamond 80° (CCGT)
- Diamond 80° (CCGW)
- Diamond 80° (CCMA)
- Diamond 80° (CCMH)
- Diamond 80° (CCMT)
- Diamond 80° (CCMW)
- Diamond 80° (CCMX)
- Diamond 80° (CNG)
- Diamond 80° (CNGA)
- Diamond 80° (CNGG)
- Diamond 80° (CNGM)
- Diamond 80° (CNGP)
- Diamond 80° (CNGX)
- Diamond 80° (CNMA)
- Diamond 80° (CNMM)
- Diamond 80° (CNMN)
- Diamond 80° (CNMP)
- Diamond 80° (CNMU)
- Diamond 80° (CNMX)
- Diamond 80° (CPEW)
- Diamond 80° (CPG)
- Diamond 80° (CPGA)
- Diamond 80° (CPGB)
- Diamond 80° (CPGT)
- Diamond 80° (CPMA)
- Diamond 80° (CPMB)
- Diamond 80° (CPMH)
- Diamond 80° (CPMT)
- Diamond 80° (CPMX)
- Double-sided Double-edge General Grooving Insert
- Double-Sided Two Edges Grooving & Parting Insert
- Micro Mini Twin
- Mini Cut-off Insert
- Mini Precision Grooving & Parting Insert
- Mini Single Edge External Grooving Part-off Insert
- Mini Single Edge Parting
- Multi-Directional
- Narrow Slot Single Tip
- Partial Tip CBN Insert
- Rhombic 35° (PBVBW)
- Rhombic 35° (PBVC)
- Rhombic 35° (PBVG)
- Rhombic 35° (VBET)
- Rhombic 35° (VBGA)
- Rhombic 35° (VBGT)
- Rhombic 35° (VBGW)
- Rhombic 35° (VBMA)
- Rhombic 35° (VBMT)
- Rhombic 35° (VCET)
- Rhombic 35° (VCGA)
- Rhombic 35° (VCGT)
- Rhombic 35° (VCGW)
- Rhombic 35° (VCMA)
- Rhombic 35° (VCMT)
- Rhombic 35° (VCMX)
- Rhombic 35° (VDGX)
- Rhombic 35° (VNGA)
- Rhombic 35° (VNGG)
- Rhombic 35° (VNGM)
- Rhombic 35° (VNMA)
- Rhombic 35° (VPET)
- Rhombic 35° (VPGT)
- Rhombic 35° (VPMA)
- Round (RCGT)
- Round (RCGX)
- Round (RCMX)
- Round (RNG)
- Round (RNMA)
- Round (RNMG)
- Round (RPGA)
- Square (SCGT)
- Square (SCMA)
- Square (SCMT)
- Square (SCMW)
- Square (SCMX)
- Square (SNEW)
- Square (SNG)
- Square (SNGA)
- Square (SNGG)
- Square (SNMA)
- Square (SNML)
- Square (SNMM)
- Square (SNMN)
- Square (SNMR)
- Square (SNMX)
- Square (SNPL)
- Square (SNPR)
- Square (SOMX)
- Square (SPG)
- Square (SPGA)
- Square (SPGG)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Triangle (TBGE)
- Triangle (TBGT)
- Triangle (TBGW)
- Triangle (TBMT)
- Triangle (TCGA)
- Triangle (TCGT)
- Triangle (TCGW)
- Triangle (TCMA)
- Triangle (TCMT)
- Triangle (TCMW)
- Triangle (TCMX)
- Triangle (TEEN)
- Triangle (TEGE)
- Triangle (TEGN)
- Triangle (TEGX)
- Triangle (TNG)
- Triangle (TNGA)
- Triangle (TNGG)
- Triangle (TNGM)
- Triangle (TNMA)
- Triangle (TNMC)
- Triangle (TNML)
- Triangle (TNMM)
- Triangle (TNMN)
- Triangle (TNMR)
- Triangle (TNMU)
- Triangle (TNMX)
- Triangle (TNPL)
- Triangle (TNPR)
- Triangle (TPEW)
- Triangle (TPG)
- Triangle (TPGA)
- Triangle (TPGB)
- Triangle (TPGD)
- Triangle (TPGG)
- Triangle (TPGH)
- Triangle (TPGT)
- Triangle (TPGW)
- Triangle (TPGX)
- Triangle (TPMA)
- Triangle (TPMH)
- Triangle (TPMN)
- Triangle (TPMR)
- Triangle (TPMT)
- Triangle (TPMX)
- Triangle (TRM)
- Triangle (TUE)
- Trigon 80° (WBED)
- Trigon 80° (WBGT)
- Trigon 80° (WBMT)
- Trigon 80° (WBMX)
- Trigon 80° (WCGT)
- Trigon 80° (WCMT)
- Trigon 80° (WDXT)
- Trigon 80° (WNGA)
- Trigon 80° (WNGG)
- Trigon 80° (WNMA)
- Trigon 80° (WPMT)
- Grooving Inserts
- Milling Inserts
- Irregular arc edge
- Irregular arc edge (XDLT)
- Irregular arc edge (XDPT)
- Octagonal
- Octagonal (ODHT)
- Octagonal (ODMT)
- Octagonal (ODMW)
- Octagonal (OECR)
- Octagonal (OEMT)
- Octagonal (OEMX)
- Octagonal (OFCR)
- Octagonal (OFCT)
- Octagonal (OFEN)
- Octagonal (OFER)
- Octagonal (OFET)
- Octagonal (OFEX)
- Octagonal (OFKR)
- Octagonal (OFKT)
- Octagonal (OFMR)
- Octagonal (OFMT)
- Octagonal (OFMW)
- Octagonal (ONCU)
- Octagonal (ONEF)
- Octagonal (ONET)
- Octagonal (ONGU)
- Octagonal (ONHU)
- Octagonal (ONMF)
- Octagonal (ONMT)
- Octagonal (ONMU)
- Octagonal (ONMX)
- Octagonal (ONPX)
- Octagonal (OWHT)
- Octagonal (OWMT)
- Octagonal (OXMT)
- Parallelogram 75°
- Parallelogram 80°
- Parallelogram 82°
- Parallelogram 85°
- Parallelogram 85° (ADCT)
- Parallelogram 85° (ADEH)
- Parallelogram 85° (ADGT)
- Parallelogram 85° (ADKR)
- Parallelogram 85° (ADKT)
- Parallelogram 85° (ADMT)
- Parallelogram 85° (AEMW)
- Parallelogram 85° (ANGX)
- Parallelogram 85° (ANHX)
- Parallelogram 85° (AOMT)
- Parallelogram 85° (APCR)
- Parallelogram 85° (APCT)
- Parallelogram 85° (APET)
- Parallelogram 85° (APFT)
- Parallelogram 85° (APGT)
- Parallelogram 85° (APHT)
- Parallelogram 85° (APKR)
- Parallelogram 85° (APKT)
- Parallelogram 85° (APKX)
- Parallelogram 85° (APLX)
- Parallelogram 85° (APPT)
- Parallelogram 85° (APXT)
- Parallelogram 85° (AXMT)
- Parallelogram 85° (APMT)
- Parallelogram 88°
- Parallelogram 90°
- Rectangular
- Rectangular (LBMC)
- Rectangular (LCGX)
- Rectangular (LCMF)
- Rectangular (LCMR)
- Rectangular (LCMT)
- Rectangular (LCMX)
- Rectangular (LMMU)
- Rectangular (LNAT)
- Rectangular (LNCQ)
- Rectangular (LNEG)
- Rectangular (LNET)
- Rectangular (LNEX)
- Rectangular (LNGX)
- Rectangular (LNHQ)
- Rectangular (LNHT)
- Rectangular (LNHU)
- Rectangular (LNKT)
- Rectangular (LNKW)
- Rectangular (LNKX)
- Rectangular (LNMN)
- Rectangular (LNMT)
- Rectangular (LNMU)
- Rectangular (LNMX)
- Rectangular (LNUX)
- Rectangular (LOEX)
- Rectangular (LOGT)
- Rectangular (LOGU)
- Rectangular (LOGUO)
- Rectangular (LOHT)
- Rectangular (LOHW)
- Rectangular (LOMU)
- Rectangular (LPET)
- Rectangular (LPGT)
- Rectangular (LPHT)
- Rectangular (LPHW)
- Rectangular (LPKT)
- Rectangular (LPKW)
- Rectangular (LPMW)
- Rectangular (LPNT)
- Rectangular (LQMU)
- Rectangular (LSMT)
- Rectangular (LXMU)
- Rectangular (ZDET)
- Round
- Round (RBET)
- Round (RCGT)
- Round (RCGX)
- Round (RCHT)
- Round (RCKT)
- Round (RCMM)
- Round (RCMT)
- Round (RCMX)
- Round (RDFG)
- Round (RDGT)
- Round (RDHW)
- Round (RDHX)
- Round (RDKT)
- Round (RDKW)
- Round (RDMT)
- Round (RDMW)
- Round (RDMX)
- Round (REMT)
- Round (RNGN)
- Round (ROMT)
- Round (ROMU)
- Round (ROUND)
- Round (RPEW)
- Round (RPGT)
- Round (RPMT)
- Round (RXMT)
- Round (RXMX)
- Round (RYMX)
- Round (RCMW)
- Round (RPMW)
- Square
- Square (SCMT)
- Square (SDCT)
- Square (SDET)
- Square (SDKN)
- Square (SDKR)
- Square (SDKW)
- Square (SDMR)
- Square (SDMT)
- Square (SDMW)
- Square (SDXN)
- Square (SECR)
- Square (SEEN)
- Square (SEER)
- Square (SEET)
- Square (SEEW)
- Square (SEGT)
- Square (SEHT)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEKW)
- Square (SEMM)
- Square (SEMR)
- Square (SEMT)
- Square (SEMW)
- Square (SEXT)
- Square (SFCN)
- Square (SKET)
- Square (SNCU)
- Square (SNEG)
- Square (SNEU)
- Square (SNEX)
- Square (SNGX)
- Square (SNKN)
- Square (SNMN)
- Square (SNMT)
- Square (SNMX)
- Square (SNUN)
- Square (SOMT)
- Square (SPCH)
- Square (SPCN)
- Square (SPCT)
- Square (SPCW)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPHT)
- Square (SPKN)
- Square (SPKR)
- Square (SPKT)
- Square (SPKW)
- Square (SPMN)
- Square (SPMR)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPRN)
- Square (SPUN)
- Square (STHX)
- Square (TEKN)
- Square (SDKT)
- Square (SNMU)
- Square (SNHX)
- Square (SPHX)
- Triangle
- Trigon
- Trigon (WOEJ)
- Drill & Mill Combo Insert (QOGT)
- Drill & Mill Combo Insert (QOMT)
- Face Milling Insert (2NGU)
- Face Milling Insert (6NGU)
- Face Milling Insert (6NMU)
- Grooving Milling Insert (AOGT)
- Grooving Milling Insert (AOMT)
- High Feed Radius Milling Insert (ENMU)
- High Feed Radius Milling Insert (JPGX)
- High Feed Radius Milling Insert (JPMX)
- High Speed Face Milling Insert (NNMQ)
- High Speed Face Milling Insert (NNMU)
- Irregular arc edge (XCP)
- Irregular arc edge (XDCW)
- Irregular arc edge (XDET)
- Irregular arc edge (XDGT)
- Irregular arc edge (XDGX)
- Irregular arc edge (XDHX)
- Irregular arc edge (XDLW)
- Irregular arc edge (XDMT)
- Irregular arc edge (XDPW)
- Irregular arc edge (XDPX)
- Irregular arc edge (XEET)
- Irregular arc edge (XELT)
- Irregular arc edge (XELW)
- Irregular arc edge (XEPW)
- Irregular arc edge (XNGJ)
- Irregular arc edge (XNMU)
- Irregular arc edge (XNXF)
- Irregular arc edge (XOGU)
- Irregular arc edge (XOHT)
- Irregular arc edge (XOMT)
- Irregular arc edge (XPCW)
- Irregular arc edge (XPET)
- Irregular arc edge (XPLT)
- Irregular arc edge (XPMT)
- Irregular arc edge (XPNT)
- Micro Internal Grooving Insert
- Multi-edge Face Milling Insert (LNHX)
- Multi-edge Face Milling Insert (LNMX)
- Multi-edge Face Milling Insert (LOGU)
- Octagonal (ODET)
- Octagonal (ODPT)
- Octagonal (OFPT)
- Octagonal (ONEC)
- Octagonal (ONGX)
- Parallelogram (JOMT)
- Parallelogram 55° (KNUX)
- Parallelogram 75° (EDCT)
- Parallelogram 75° (EDPT)
- Parallelogram 80° (CCMX)
- Parallelogram 80° (CDE)
- Parallelogram 80° (CNHQ)
- Parallelogram 80° (CNHU)
- Parallelogram 80° (CPMT)
- Parallelogram 80° (HDHN)
- Parallelogram 80° (HNEC)
- Parallelogram 80° (HNEN)
- Parallelogram 80° (HNGF)
- Parallelogram 80° (HNGJ)
- Parallelogram 80° (HNHX)
- Parallelogram 80° (HNPX)
- Parallelogram 82° (BDHX)
- Parallelogram 82° (BGHX)
- Parallelogram 82° (BPHX)
- Parallelogram 85° (ACET)
- Parallelogram 85° (ADPT)
- Parallelogram 85° (ANGT)
- Parallelogram 85° (APFX)
- Parallelogram 85° (APMT)
- Parallelogram 88° (GD)
- Parallelogram 88° (GDXMP)
- Parallelogram 90° (LFEW)
- Parallelogram 90° (LNCX)
- Parallelogram 90° (LNE)
- Parallelogram 90° (LNEQ)
- Parallelogram 90° (LNGQ)
- Parallelogram 90° (LNPQ)
- Parallelogram 90° (LNPU)
- Parallelogram 90° (LPE)
- Parallelogram 90° (MDHX)
- Parallelogram 90° (PDHX)
- Parallelogram 90° (YCE)
- Rectangular (K90BPD)
- Rectangular (ZDET)
- Round (RDCW)
- Round (RDPX)
- Round (REHR)
- Round (RFCW)
- Round (RFHN)
- Round (RIR)
- Round (RNGJ)
- Round (RNPJ)
- Round (RPCW)
- Round (RPET)
- Round (RPEX)
- Round (RPGB)
- Round (RPGN)
- Round (RPHT)
- Round (RPMT)
- Round (RPMW)
- Round (RPPT)
- Round (RXCR)
- Round (SRM)
- Semicircle (KDMB)
- Semicircle (KDMS)
- Semicircle (KDMT)
- Semicircle (KEGT)
- Semicircle (KGIP)
- Semicircle (KSDR)
- Special for High Speed Face Milling (GOEN)
- Special for High Speed Face Milling (GOER)
- Square (SDCH)
- Square (SDCN)
- Square (SDCW)
- Square (SDEB)
- Square (SDHN)
- Square (SDPT)
- Square (SEAN)
- Square (SECT)
- Square (SECW)
- Square (SECX)
- Square (SEER)
- Square (SEET)
- Square (SEGN)
- Square (SEGT)
- Square (SEHW)
- Square (SEKN)
- Square (SEKR)
- Square (SEKT)
- Square (SEMT)
- Square (SEPR)
- Square (SEPT)
- Square (SNGN)
- Square (SNHJ)
- Square (SNKN)
- Square (SNMU)
- Square (SNPJ)
- Square (SNXF)
- Square (SOET)
- Square (SOGT)
- Square (SOMT)
- Square (SONX)
- Square (SPCB)
- Square (SPCH)
- Square (SPCT)
- Square (SPCW)
- Square (SPEB)
- Square (SPEN)
- Square (SPET)
- Square (SPGN)
- Square (SPGX)
- Square (SPKN)
- Square (SPMT)
- Square (SPMW)
- Square (SPMX)
- Square (SPPT)
- Square (SPUN)
- Square Round Nose Finishing Insert (ZCFW)
- Triangle (TNHF)
- Triangle (TNHN)
- Triangle (TPEW)
- Triangle (TPGN)
- Triangle (TPKN)
- Triangular High Feed Milling Insert (JDMT)
- Triangular High Feed Milling Insert (JDMU)
- Triangular High Feed Milling Insert (JDMW)
- Trigon (WEEW)
- Trigon (WNEU)
- Trigon (WNGU)
- Trigon (WOEX)
- Trigon (WPGX)
- Trigon (WPMT)
- Trigon (WPMW)
- Universal Shoulder Milling Insert (MPMX)
- Measurings
- Reamers
- Taps
- Tool Holder
Mitsubishi SCMT09T308 UC5115 Square Steel SCMT322
$23.80
The Mitsubishi UC5115 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SCMT09T308 UC5115.
Mitsubishi grade — recommended for cast iron (K).
Recommended cutting data
Group K — Cast iron
- Grey iron (HB ≤ 240)
Vc: 120–280 m/min; f: 0.15–0.50 mm/rev; ap ≤ 4.0 mm - Ductile / nodular iron (HB 200–300)
Vc: 100–220 m/min; f: 0.12–0.40 mm/rev; ap ≤ 3.0 mm
Dry or minimal coolant works; mind the entry impact.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Mitsubishi |
|---|---|
| Part No. (MPN) | SCMT09T308 |
| Grade | UC5115 |
| Shape | Square |
| Suitable Material | Steel |
| Category | Square (SNMG) |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Mitsubishi GY2M0300F150N-BM VP10RT
$60.20Add to cartThe Mitsubishi GY2M0300F150N-BM VP10RT is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: GY2M0300F150N-BM VP10RT.
-
Original Mitsubishi LOGU1207100PNER-M MP9120 Carbide Milling Insert – Rectangle | Steel
$42.22Add to cartThe Mitsubishi MP9120 is a professional-grade carbide insert designed for milling operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: LOGU1207100PNER-M MP9120.
-
Mitsubishi TNMG332MA MC7125 Triangle Steel TNMG160408
$18.18Add to cartThe Mitsubishi MC7125 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TNMG332MA MC7125.
-
Mitsubishi TPMH222SV NX3035 Triangle Steel TPMH110308
$13.52Add to cartThe Mitsubishi NX3035 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TPMH222SV NX3035.
More from Mitsubishi
-
Original Mitsubishi XDGX175040PDFR-GL Carbide Milling Insert | Aluminum & More TF15PDFR-GL TF15
$57.84Add to cartThe Mitsubishi XDGX175040PDFR-GL TF15 is a professional-grade carbide insert designed for aluminum and non-ferrous metal machining. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 500-1500 m/min with polished carbide. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: XDGX175040PDFR-GL TF15.
-
Mitsubishi CCMW32.52 MC5125 Diamond 80° CCMW09T308 CCMW322
$24.13Add to cartThe Mitsubishi MC5125 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: CCMW32.52 FLAT MC5125.
-
Mitsubishi VNMG331LK MC5105 Diamond 35° VNMG160404
$29.24Add to cartThe Mitsubishi MC5105 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: VNMG331LK MC5105.
-
Mitsubishi TPMH1.81.52MV MC7125 Triangle Steel TPMH090208 TPMH312
$21.30Add to cartThe Mitsubishi MC7125 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TPMH1.81.52MV MC7125.
-
Original Mitsubishi QOMT1443R-M2 MP7130 Carbide Milling Insert
$29.71Add to cartThe Mitsubishi MP7130 is a professional-grade carbide tool designed for milling operations including face milling and slot milling. Suitable for use on CNC lathes and machining centers with appropriate tool holders. Recommended for production environments where consistent surface finish and dimensional accuracy are critical. For optimal results, use with through-coolant or high-pressure coolant delivery. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: QOMT1443R…
-
Mitsubishi TCMT21.51MM MC7025 Triangle Steel TCMT110204 TCMT411
$21.43Add to cartThe Mitsubishi MC7025 is a professional-grade carbide insert designed for carbon and alloy steel turning. Mitsubishi MC7025 premium CVD grade for heavy interrupted steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TCMT21.51MM MC7025.
-
Mitsubishi TNMG433MH MC6135 Triangle TNMG220412
$22.27Add to cartThe Mitsubishi MC6135 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TNMG433MH MC6135.
-
Mitsubishi WNMG331LM MC7025 Trigon 80° Steel WNMG090404
$18.96Add to cartThe Mitsubishi MC7025 is a professional-grade carbide insert designed for carbon and alloy steel turning. Mitsubishi MC7025 premium CVD grade for heavy interrupted steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: WNMG331LM MC7025.












