Sandvik 001-03 5257
$63.38
Sandvik 5257 001-03 CNC cutting tool for professional CNC machining. Genuine OEM part. Free worldwide shipping from Hooguu. Ships within 24 hours.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sandvik |
|---|---|
| Part No. (MPN) | 5257 001-03 |
| Category | Accessory |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Carmex MTR 1.5 R0.1 L6 BMK Min Bore Diam, .240 Max Depth, 3mm Shank Diam., Solid Carbide Mini
$6.06Add to cart- Combination of carbide substrates, tool geometries & improved coating technologies, yield longer tool life, superior finishes & reduced cycle times.
- Chip evacuation is obtained thanks to advanced chip breaker & the internal coolant through the tool, pushing the chips out of the hole.
- Boring and profiling.
- From prototypes to mass production, aluminum to waspaloy, Carmex offers the best tools for your most difficult materials.
- PVD triple coating, extremely high heat resistance & smooth cutting operation for all materials including stainless steels, cast iron & nickel alloys.
- PVD TiN coated micro grain works well with a wide range of materials including stainless steel.
- Thru coolant.
-
Nachi 1080888 21/64 Size 135° Cobalt Screw Machine Length Stub Drill SIZE030420
$2.40Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Iscar STANDARD Carbide Grooving/Parting Insert Square TGFH 26-5
$17.60Add to cart- Very rigid clamping.
- High reliability, High rigidity, and increased stability.
- Provides excellent straightness and surface finish.
- Excellent tool and pocket life.
- Coolant-free operation.
- Large assortments, available in all standard geometry and width.
- Recommended for parting large diameter parts and for interrupted cuts.
- Suitable for higher feed rates and long reach.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Compatible with most standard TAG series of inserts and blade holders.
More from Sandvik
-
Sandvik 460.1-1750-053A0-XM Drill GC34
Price on requestRequest a QuoteThe Sandvik 460.1-1750-053A0-XM GC34 is a professional-grade carbide tool designed for drilling operations in steel, cast iron, and non-ferrous materials. Suitable for use on CNC lathes and machining centers with appropriate tool holders. Recommended for production environments where consistent surface finish and dimensional accuracy are critical. For optimal results, use with through-coolant or high-pressure coolant delivery. Available from Hooguu.com with worldwide shipping and competitive …
-
Sandvik TCGW090204S01530F Triangle 7525 TCGW211 TCGW110204
$25.31Add to cartThe Sandvik TCGW211 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: TCGW090204S01530F 7525.
-
Sandvik N151.3-A125-30-4G H13A
$4.58Add to cartThe Sandvik N151.3-A125-30-4G H13A is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: N151.3-A125-30-4G H13A.












