Sandvik 005-180 3611
$2.64
Sandvik 3611 005-180 CNC cutting tool for professional CNC machining. Genuine OEM part. Free worldwide shipping from Hooguu. Ships within 24 hours.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sandvik |
|---|---|
| Part No. (MPN) | 3611 005-180 |
| Category | Accessory |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Iscar STANDARD Carbide Grooving/Parting Insert Square TGFH 32-1.6
$18.93Add to cart- Very rigid clamping.
- High reliability, High rigidity, and increased stability.
- Provides excellent straightness and surface finish.
- Excellent tool and pocket life.
- Coolant-free operation.
- Large assortments, available in all standard geometry and width.
- Recommended for parting large diameter parts and for interrupted cuts.
- Suitable for higher feed rates and long reach.
- Used to produce grooves and to cut-off (parting) pieces in a turning machine.
- Compatible with most standard TAG series of inserts and blade holders.
-
Nachi 1080916 3/8 Size 135° Cobalt Screw Machine Length Stub Drill SIZE030420
$2.98Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
More from Sandvik
-
Sandvik N123T3-0150-RS 1125
$13.28Add to cartThe Sandvik N123T3-0150-RS 1125 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: N123T3-0150-RS 1125.
-
Sandvik KM1020 N331 Parallelogram 55° N331.1A-08 45 08E
$5.48Add to cartThe Sandvik KM1020 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: N331.1A-08 45 08E-KM1020.












