
Sumitomo SCGT070202MN-SC AC530U Carbide Turning Insert – Square, R0.2, SC chipbreaker | Steel & Stainless Steel SCGT210
$119.70
Genuine Sumitomo Electric SCGT070202MN-SC AC530U carbide turning insert with a Square (S-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade AC530U is a PVD-coated carbide grade: interrupted turning of steel and stainless steel; fine-grain tough substrate with multi-layer coating.
Sumitomo grade — recommended for steel (P), stainless steel (M), cast iron (K).
Recommended cutting data
Group P — Carbon & alloy steels
- Low-carbon / structural steel (HB ≤ 200)
Vc: 180–320 m/min; f: 0.10–0.40 mm/rev; ap ≤ 4.0 mm - Alloy / quenched-and-tempered steel (HB 200–330)
Vc: 120–240 m/min; f: 0.10–0.35 mm/rev; ap ≤ 3.0 mm
Raise Vc for continuous cuts; lower it and pick a tougher chipbreaker for interrupted cuts.
Group M — Stainless steel
- Ferritic / martensitic (HB ≤ 220)
Vc: 120–200 m/min; f: 0.08–0.30 mm/rev; ap ≤ 3.0 mm - Austenitic 304 / 316 (work-hardening)
Vc: 90–160 m/min; f: 0.08–0.25 mm/rev; ap ≤ 2.5 mm
Flood coolant; avoid too low a feed to prevent work hardening.
Group K — Cast iron
- Grey iron (HB ≤ 240)
Vc: 120–280 m/min; f: 0.15–0.50 mm/rev; ap ≤ 4.0 mm - Ductile / nodular iron (HB 200–300)
Vc: 100–220 m/min; f: 0.12–0.40 mm/rev; ap ≤ 3.0 mm
Dry or minimal coolant works; mind the entry impact.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sumitomo |
|---|---|
| Part No. (MPN) | SCGT070202MN-SC |
| Grade | AC530U |
| Type | Turning Insert |
| Shape | Square |
| Suitable Material | Steel |
| Category | Turning Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
HITACHI SDNW1205ZDTN-R15 JP4020 Square
$54.18Add to cartThe Hitachi JP4020 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SDNW1205ZDTN-R15 JP4020.
-
Achteck SNMG 150608E-PD5 AC052P SNMG542
$22.14Add to cartThe Achteck SNMG542 is a professional-grade carbide insert designed for general CNC turning and machining operations. Featuring a SNMG geometry — 90-degree square insert offering maximum edge count for heavy roughing. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SNMG 150608E…
-
Original HOOGUU SCGT09T304-CM Carbide Turning Insert – Square | Aluminum, Titanium, Copper CP2630TN SCGT09T304-CM CP2630TN SCGT321
Price on requestRequest a QuoteTurning Insert: SCGT09T304-CM CP2630TN, Carbide – CP2630TN (PVD, PVD Coated), for Stainless Steel/Titanium Alloy/Superalloy Stainless/Titanium/Superalloy, chipbreaker CM sharp (CGT positive rake), Ap 0.2-0.8mm, fz 0.06-0.15mm/z, working condition: very poor
More from Sumitomo
-
Sumitomo SNMN120416 AC4010K Carbide Turning Insert – Square, R1.6 | Cast Iron SNMN434
$120.30Add to cartGenuine Sumitomo Electric SNMN120416 AC4010K carbide turning insert with a Square (S-type) shape, 0° clearance and no hole, no chipbreaker. Grade AC4010K is a CVD-coated carbide grade: first-choice grade for grey cast iron; thick coating for high-speed turning.
-
Sumitomo SNMA190616 AC4010K Carbide Turning Insert – Square, R1.6 | Cast Iron SNMA644
$218.70Add to cartGenuine Sumitomo Electric SNMA190616 AC4010K carbide turning insert with a Square (S-type) shape, 0° clearance and with hole, no chipbreaker. Grade AC4010K is a CVD-coated carbide grade: first-choice grade for grey cast iron; thick coating for high-speed turning.
-
Sumitomo CNMG120412N-GU AC520U Carbide Turning Insert – Diamond 80°, R1.2, GU chipbreaker | Heat-Resistant Alloys & Stainless Steel CNMG433
$80.40Add to cartGenuine Sumitomo Electric CNMG120412N-GU AC520U carbide turning insert with a Diamond 80° (C-type) shape, 0° clearance and with hole, double-sided chipbreaker. Grade AC520U is a PVD-coated carbide grade: interrupted turning of heat-resistant alloys.
-
Sumitomo 2NC-DCGW070202 BNC2010 CBN Turning Insert – Diamond 55°, R0.2 | Hardened Steel DCGW210
$963.90Add to cartGenuine Sumitomo Electric 2NC-DCGW070202 BNC2010 CBN turning insert with a Diamond 55° (D-type) shape, 7° clearance and countersunk hole, no chipbreaker. Grade BNC2010 is a coated CBN (SUMIBORON) grade: machining of hardened steel.
-
Sumitomo DCGT070201L-FX AC1030U Carbide Turning Insert – Diamond 55°, R0.1, FX chipbreaker | Steel & Stainless Steel DCGT210
$133.20Add to cartGenuine Sumitomo Electric DCGT070201L-FX AC1030U carbide turning insert with a Diamond 55° (D-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade AC1030U is a PVD-coated carbide grade: first-choice grade for precision and small-lathe (Swiss-type) turning.
-
Sumitomo SDP1130S12H05X PCX70 Solid Carbide Drill – Ø11.3 mm | Steel & Stainless Steel
$2,946.90Add to cartGenuine Sumitomo Electric SDP1130S12H05X PCX70 from the SumiDrill Power Series SDP range. Solid carbide drill with internal coolant, elliptical flutes for chip evacuation and a double margin for hole accuracy. Grade PCX70 is a PVD-coated carbide grade: Sumi-Power coating with improved anti-adhesion, for steel, stainless steel and cast iron.







