
Sumitomo SCGT09T301MN-SC AC530U Carbide Turning Insert – Square, R0.1, SC chipbreaker | Steel & Stainless Steel SCGT320
$152.70
Genuine Sumitomo Electric SCGT09T301MN-SC AC530U carbide turning insert with a Square (S-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade AC530U is a PVD-coated carbide grade: interrupted turning of steel and stainless steel; fine-grain tough substrate with multi-layer coating.
Sumitomo grade — recommended for steel (P), stainless steel (M), cast iron (K).
Recommended cutting data
Group P — Carbon & alloy steels
- Low-carbon / structural steel (HB ≤ 200)
Vc: 180–320 m/min; f: 0.10–0.40 mm/rev; ap ≤ 4.0 mm - Alloy / quenched-and-tempered steel (HB 200–330)
Vc: 120–240 m/min; f: 0.10–0.35 mm/rev; ap ≤ 3.0 mm
Raise Vc for continuous cuts; lower it and pick a tougher chipbreaker for interrupted cuts.
Group M — Stainless steel
- Ferritic / martensitic (HB ≤ 220)
Vc: 120–200 m/min; f: 0.08–0.30 mm/rev; ap ≤ 3.0 mm - Austenitic 304 / 316 (work-hardening)
Vc: 90–160 m/min; f: 0.08–0.25 mm/rev; ap ≤ 2.5 mm
Flood coolant; avoid too low a feed to prevent work hardening.
Group K — Cast iron
- Grey iron (HB ≤ 240)
Vc: 120–280 m/min; f: 0.15–0.50 mm/rev; ap ≤ 4.0 mm - Ductile / nodular iron (HB 200–300)
Vc: 100–220 m/min; f: 0.12–0.40 mm/rev; ap ≤ 3.0 mm
Dry or minimal coolant works; mind the entry impact.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sumitomo |
|---|---|
| Part No. (MPN) | SCGT09T301MN-SC |
| Grade | AC530U |
| Type | Turning Insert |
| Shape | Square |
| Suitable Material | Steel |
| Category | Turning Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Original HOOGUU SCGT09T308-CAL Carbide Turning Insert – Square | Cast Iron, Aluminum CW10 SCGT09T308-CAL CW10 SCGT322
Price on requestRequest a QuoteTurning Insert: SCGT09T308-CAL CW10, Carbide – CW10 (Uncoated, Uncoated), for Stainless Steel/Titanium Alloy/Superalloy/Nonferrous Stainless/Titanium/Superalloy/Nonferrous, chipbreaker CAL very sharp (positive rake), Ap 0.8-2.0mm, fz 0.06-0.4mm/z, working condition: very poor
-
Mitsubishi SPMN631 Square Steel UTI20T SPMN190404
$32.27Add to cartThe Mitsubishi SPMN631 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SPMN631 UTI20T.
-
AKUMA 07.22.00288 Multi Piece Set
$414.19Add to cartThis 07.22.00288 – Multi Piece Indexable End Mill Set is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: 07.22.00288 – Multi Piece Indexable End Mill Set.
More from Sumitomo
-
Sumitomo DNGG150408N-EF AC520U Carbide Turning Insert – Diamond 55°, R0.8, EF chipbreaker | Heat-Resistant Alloys & Stainless Steel DNGG532
$204.90Add to cartGenuine Sumitomo Electric DNGG150408N-EF AC520U carbide turning insert with a Diamond 55° (D-type) shape, 0° clearance and with hole, double-sided chipbreaker. Grade AC520U is a PVD-coated carbide grade: interrupted turning of heat-resistant alloys.
-
Sumitomo SDP0980U7HAK PCX70 Solid Carbide Drill – Ø9.8 mm, 7×D | Steel & Stainless Steel
$3,181.80Add to cartGenuine Sumitomo Electric SDP0980U7HAK PCX70 from the SumiDrill Power Series SDP range. Solid carbide drill with internal coolant, elliptical flutes for chip evacuation and a double margin for hole accuracy. Grade PCX70 is a PVD-coated carbide grade: Sumi-Power coating with improved anti-adhesion, for steel, stainless steel and cast iron.
-
Sumitomo DCMT070202N-LB T2500Z Cermet Turning Insert – Diamond 55°, R0.2, LB chipbreaker | Steel & Stainless Steel DCMT210
$62.40Add to cartGenuine Sumitomo Electric DCMT070202N-LB T2500Z cermet turning insert with a Diamond 55° (D-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade T2500Z is a PVD-coated cermet grade: finishing of steel; Brilliant Coat on a tough cermet substrate.
-
Sumitomo 6NC-TNGG160412N-FV BNC2125 CBN Turning Insert – Triangle, R1.2, FV chipbreaker | Hardened Steel TNGG333
$2,463.30Add to cartGenuine Sumitomo Electric 6NC-TNGG160412N-FV BNC2125 CBN turning insert with a Triangle (T-type) shape, 0° clearance and with hole, double-sided chipbreaker. Grade BNC2125 is a coated CBN (SUMIBORON) grade: machining of hardened steel.
-
Sumitomo MDE1530S16H08 ACT100 Solid Carbide Drill – Ø15.3 mm | Steel & Stainless Steel
$10,343.10Add to cartGenuine Sumitomo Electric MDE1530S16H08 ACT100 from the MULTIDRILL NeXEO MDE Series range. General-purpose solid carbide drill for high-carbon steel, die steel and stainless steel; RX thinning lowers thrust, suitable for small machining centres and lathes. Grade ACT100 is a PVD-coated carbide grade: NX Coat, a super multi-layer TiAlCrSi coating (Absotech technology) with excellent wear and heat resistance.
-
Sumitomo MDE0960S10H08 ACT100 Solid Carbide Drill – Ø9.6 mm | Steel & Stainless Steel
$4,752.60Add to cartGenuine Sumitomo Electric MDE0960S10H08 ACT100 from the MULTIDRILL NeXEO MDE Series range. General-purpose solid carbide drill for high-carbon steel, die steel and stainless steel; RX thinning lowers thrust, suitable for small machining centres and lathes. Grade ACT100 is a PVD-coated carbide grade: NX Coat, a super multi-layer TiAlCrSi coating (Absotech technology) with excellent wear and heat resistance.




