Original Sumitomo SCMT432ENK AC8035P Carbide Turning Insert – Square SCMT120408
$21.04
Turning Insert: SCMT432ENK AC8035P, Carbide – AC8035P, Absotech Platinum Finish, Neutral, 1/2″ Long, 1/2″ Inscribed Circle, 1/32″ Corner Radius, 90.00 deg S – Square, Series SC
Sumitomo grade — recommended for steel (P).
Recommended cutting data
Group P — Carbon & alloy steels
- Low-carbon / structural steel (HB ≤ 200)
Vc: 180–320 m/min; f: 0.10–0.40 mm/rev; ap ≤ 4.0 mm - Alloy / quenched-and-tempered steel (HB 200–330)
Vc: 120–240 m/min; f: 0.10–0.35 mm/rev; ap ≤ 3.0 mm
Raise Vc for continuous cuts; lower it and pick a tougher chipbreaker for interrupted cuts.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sumitomo |
|---|---|
| Part No. (MPN) | SCMT432ENK |
| Grade | AC8035P |
| Type | Turning Insert |
| Shape | Square |
| Category | Turning Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Mitsubishi SCMT32.51LP NX2525 Square Steel SCMT09T304 SCMT321
$17.91Add to cartThe Mitsubishi NX2525 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SCMT32.51LP NX2525.
-
Korloy SNMA120408 NC6210 Square Steel SNMA432
$100.00Original price was: $100.00.$80.00Current price is: $80.00.Add to cartThe Korloy SNMA120408 is a professional-grade carbide insert designed for carbon and alloy steel turning. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SNMA120408 NC6210.
-
Original HOOGUU SCMT120408-CM Carbide Turning Insert – Square | Steel & More CC1135G1 SCMT120408-CM CC1135G1 SCMT432
Price on requestRequest a QuoteTurning Insert: SCMT120408-CM CC1135G1, Carbide – CC1135G1 (CVD, CVD Coated), for Stainless Steel/Titanium Alloy/Superalloy Stainless/Titanium/Superalloy, chipbreaker CM sharp (CMT/G1), Ap 0.3-1.5mm, fz 0.06-0.25mm/z, working condition: very poor
More from Sumitomo
-
Sumitomo SDP0330U3HA PCX70 Solid Carbide Drill – Ø3.3 mm, 3×D | Steel & Stainless Steel
$713.40Add to cartGenuine Sumitomo Electric SDP0330U3HA PCX70 from the SumiDrill Power Series SDP range. Solid carbide drill with internal coolant, elliptical flutes for chip evacuation and a double margin for hole accuracy. Grade PCX70 is a PVD-coated carbide grade: Sumi-Power coating with improved anti-adhesion, for steel, stainless steel and cast iron.
-
Sumitomo CTR121005R AC530U Cut-off Insert | Steel & Stainless Steel
$333.30Add to cartGenuine Sumitomo Electric CTR121005R AC530U from the SCT Small Diameter Cut-off range. Insert for small-diameter cut-off on small lathes. Grade AC530U is a PVD-coated carbide grade: interrupted turning of steel and stainless steel; fine-grain tough substrate with multi-layer coating.
-
Sumitomo GCMN4004-GF AC530U Grooving Insert | Steel & Stainless Steel
$258.90Add to cartGenuine Sumitomo Electric GCMN4004-GF AC530U from the SumiGrip GCM range. Grooving and cut-off insert for SumiGrip holders. Grade AC530U is a PVD-coated carbide grade: interrupted turning of steel and stainless steel; fine-grain tough substrate with multi-layer coating.
-
Original Sumitomo AC4010K SNMA431 Carbide Turning Insert – Parallelogram 85° | Cast Iron SNMA431 AC4010K SNMA120404
$15.79Add to cartTurning Insert: SNMA431 AC4010K, Carbide – AC4010K, Al2O3 & TiCN Finish, Neutral, 1/2″ Long, 1/2″ Inscribed Circle, 1/64″ Corner Radius, 90.00 deg S – Square, Series SN
-
Sumitomo MLDH0900L12 ACV70 Micro Long Drill – Ø0.9 mm, 12×D | Steel & Stainless Steel
$3,834.60Add to cartGenuine Sumitomo Electric MLDH0900L12 ACV70 from the Micro Long Drill MLDH-L range. Solid carbide micro drill with internal coolant for deep small holes. Grade ACV70 is a PVD-coated carbide grade: micro drilling of steel and stainless steel.
-
Sumitomo MDM0760S08H05 ACT70 Solid Carbide Drill – Ø7.6 mm, 5×D | Steel & Stainless Steel
$3,754.50Add to cartGenuine Sumitomo Electric MDM0760S08H05 ACT70 from the MULTIDRILL MDM Series range. Solid carbide drill with internal coolant; sharp arc-shaped lip, narrow margin and large back taper reduce work hardening of the hole wall. Grade ACT70 is a PVD-coated carbide grade: NX Coat, a super multi-layer TiAlCrSi coating (Absotech technology) with excellent wear and heat resistance.








