Original Sumitomo SPMT321ELB AC8035P Carbide Turning Insert – Square | Steel SPMT090304
$14.05
Turning Insert: SPMT321ELB AC8035P, Carbide – AC8035P, Absotech Platinum Finish, Neutral, 3/8″ Long, 3/8″ Inscribed Circle, 1/64″ Corner Radius, 90.00 deg S – Square, Series SPMT
Sumitomo grade — recommended for steel (P).
Recommended cutting data
Group P — Carbon & alloy steels
- Low-carbon / structural steel (HB ≤ 200)
Vc: 180–320 m/min; f: 0.10–0.40 mm/rev; ap ≤ 4.0 mm - Alloy / quenched-and-tempered steel (HB 200–330)
Vc: 120–240 m/min; f: 0.10–0.35 mm/rev; ap ≤ 3.0 mm
Raise Vc for continuous cuts; lower it and pick a tougher chipbreaker for interrupted cuts.
Figures are general reference ranges by ISO material group — adjust for tool geometry, machine rigidity and cooling. For exact recommendations refer to the manufacturer's data or contact us for a quote.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sumitomo |
|---|---|
| Part No. (MPN) | SPMT321ELB |
| Grade | AC8035P |
| Type | Turning Insert |
| Shape | Square |
| Suitable Material | Steel |
| Category | Turning Inserts |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
-
Original HOOGUU SNMG120404-CM Carbide Turning Insert – Square | Steel & More CP6110MS SNMG120404-CM CP6110MS SNMG431
$53.10Add to cartTurning Insert: SNMG120404-CM CP6110MS, Carbide – CP6110MS (PVD, PVD Coated), for Stainless Steel/Superalloy Stainless/Superalloy, chipbreaker CM sharp, Ap 0.4-1.0mm, fz 0.06-0.15mm/z, working condition: good
-
OKE SOMT09T308-ODP OPC351 Square-4 SOMT322 SOMT09T308-ODP-4
$12.00Add to cartThe OKE OPC351 is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: SOMT09T308-ODP OPC351-4.
More from Sumitomo
-
Sumitomo DCGT070202MN-FC T1000A Cermet Turning Insert – Diamond 55°, R0.2, FC chipbreaker | Steel & Stainless Steel DCGT210
$90.00Add to cartGenuine Sumitomo Electric DCGT070202MN-FC T1000A cermet turning insert with a Diamond 55° (D-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade T1000A is an uncoated cermet grade: finishing of steel with an excellent surface finish.
-
Sumitomo MDE1210S13H08 ACT100 Solid Carbide Drill – Ø12.1 mm | Steel & Stainless Steel
$6,711.30Add to cartGenuine Sumitomo Electric MDE1210S13H08 ACT100 from the MULTIDRILL NeXEO MDE Series range. General-purpose solid carbide drill for high-carbon steel, die steel and stainless steel; RX thinning lowers thrust, suitable for small machining centres and lathes. Grade ACT100 is a PVD-coated carbide grade: NX Coat, a super multi-layer TiAlCrSi coating (Absotech technology) with excellent wear and heat resistance.
-
Sumitomo WPMT110204N-LB AC820P Carbide Turning Insert – Trigon 80°, R0.4, LB chipbreaker | Steel & Cast Iron WPMT411
$64.80Add to cartGenuine Sumitomo Electric WPMT110204N-LB AC820P carbide turning insert with a Trigon 80° (W-type) shape, 11° clearance and countersunk hole, single-sided chipbreaker. Grade AC820P is a CVD-coated carbide grade: general-purpose steel turning with a good balance of wear and chipping resistance.
-
Sumitomo DCMT11T304N-GU T2500Z Cermet Turning Insert – Diamond 55°, R0.4, GU chipbreaker | Steel & Stainless Steel DCMT421
$69.60Add to cartGenuine Sumitomo Electric DCMT11T304N-GU T2500Z cermet turning insert with a Diamond 55° (D-type) shape, 7° clearance and countersunk hole, single-sided chipbreaker. Grade T2500Z is a PVD-coated cermet grade: finishing of steel; Brilliant Coat on a tough cermet substrate.
-
Original Sumitomo DNMG431EEF AC6030M Carbide Turning Insert – Diamond 55° DNMG120404
$22.90Add to cartThe Sumitomo DNMG431EEF AC6030M is a professional-grade carbide insert designed for general CNC turning and machining operations. Suitable for CNC lathes with appropriate tool holders. Recommended Vc 200-350 m/min roughing, 300-450 m/min finishing. Use through-coolant or high-pressure coolant for optimal results. Available from Hooguu.com with worldwide shipping and competitive pricing. SKU: DNMG431EEF AC6030M.
-
Sumitomo SMDT2840MTL ACX70 Drill Head – Ø28.4 mm | Steel & Stainless Steel
$3,022.20Add to cartGenuine Sumitomo Electric SMDT2840MTL ACX70 from the SumiDual Drill SMD range. Exchangeable solid carbide drill head for the SMD drill body. Grade ACX70 is a PVD-coated carbide grade: drill coating for steel, stainless steel and cast iron.
-
Sumitomo BTR3515 AC5015S Mini Turning Tool | Heat-Resistant Alloys & Stainless Steel
$366.60Add to cartGenuine Sumitomo Electric BTR3515 AC5015S from the SEC-Mini Tool Holder range. Insert for SBT / PBT mini tool holders. Grade AC5015S is a PVD-coated carbide grade: first-choice grade for turning heat-resistant alloys and titanium.
-
Sumitomo TNMG160408N-FE AC8035P Carbide Turning Insert – Triangle, R0.8, FE chipbreaker | Steel TNMG332
$72.00Add to cartGenuine Sumitomo Electric TNMG160408N-FE AC8035P carbide turning insert with a Triangle (T-type) shape, 0° clearance and with hole, double-sided chipbreaker. Grade AC8035P is a CVD-coated carbide grade: interrupted turning of steel; tensile-stress removal technology for heavy interruptions.






