
Sumitomo DTGNR2525M16 Turning Tool Holder – 25 × 25 mm, 90° offset, Right hand
$1,269.00
Genuine Sumitomo Electric DTGNR2525M16 from the SEC-Tool Holder range. ISO external turning tool holder.
- 🚚Free worldwide shipping on all orders
- ⏱️Delivery in 15–30 days · express (DHL/FedEx) on request
- 🛃Free customs clearance handling & correct HS/NCM documents
- 💬Customer service replies within 24 hours, 7 days a week
- ✅100% genuine OEM — certificates available on request
- 🔒Guaranteed safe & secure checkout · 30-day money-back guarantee
- 📷Need test samples or real photos of this exact item? Just ask our team.
| Brand | Sumitomo |
|---|---|
| Part No. (MPN) | DTGNR2525M16 |
| Type | Tool Holder |
| Shape | 90° |
| Category | Tool Holder |
What Buyers Say
100% recomendados los insertos, y el paquete está llegando muy rapido
Товар доставлен, оригинальный, упаковка отличная! Всё полностью соответствует описанию.
По сырой стали пойдёт. Большой радиус при вершине, больше нагрузка.
A good product and the seller offered a nice discount
the product is like show in the picture
дошло быстрее чем заявлено. все супер
Related products
More from Sumitomo
-
Sumitomo DNMG150604N-SU AC820P Carbide Turning Insert – Diamond 55°, R0.4, SU chipbreaker | Steel & Cast Iron DNMG541
$126.30Add to cartGenuine Sumitomo Electric DNMG150604N-SU AC820P carbide turning insert with a Diamond 55° (D-type) shape, 0° clearance and with hole, double-sided chipbreaker. Grade AC820P is a CVD-coated carbide grade: general-purpose steel turning with a good balance of wear and chipping resistance.
-
Original Sumitomo TPMT220 AC630M Carbide Turning Insert – Triangle TPMT220.5ESU TPMT220.5ESU AC630M TPMT110300
$12.99Add to cartTurning Insert: TPMT220.5ESU AC630M, Carbide – AC630M, Al2O3 Finish, Neutral, 0.4331″ Long, 0.2500″ Inscribed Circle, 0.0078″ Corner Radius, 60.00 deg T – Triangle, Series TPMT
-
Sumitomo CTR121500N AC530U Cut-off Insert | Steel & Stainless Steel
$333.30Add to cartGenuine Sumitomo Electric CTR121500N AC530U from the SCT Small Diameter Cut-off range. Insert for small-diameter cut-off on small lathes. Grade AC530U is a PVD-coated carbide grade: interrupted turning of steel and stainless steel; fine-grain tough substrate with multi-layer coating.
-
Sumitomo TPGT080202MN-SI AC5015S Carbide Turning Insert – Triangle, R0.2, SI chipbreaker | Heat-Resistant Alloys & Stainless Steel TPGT210
$103.20Add to cartGenuine Sumitomo Electric TPGT080202MN-SI AC5015S carbide turning insert with a Triangle (T-type) shape, 11° clearance and countersunk hole, single-sided chipbreaker. Grade AC5015S is a PVD-coated carbide grade: first-choice grade for turning heat-resistant alloys and titanium.
-
Sumitomo MDW0800XHGS25 ACX70 Solid Carbide Drill – Ø8 mm | Steel & Stainless Steel
$7,954.20Add to cartGenuine Sumitomo Electric MDW0800XHGS25 ACX70 from the Super MULTIDRILL (MDW) range. Solid carbide drill. Grade ACX70 is a PVD-coated carbide grade: drill coating for steel, stainless steel and cast iron.
-
Sumitomo AXMT060204PDER-H ACM200 Carbide Milling Insert – Parallelogram 85°, R0.4, H chipbreaker | Stainless Steel AXMT211
$81.90Add to cartGenuine Sumitomo Electric AXMT060204PDER-H ACM200 carbide milling insert with a Parallelogram 85° (A-type) shape and countersunk hole, single-sided chipbreaker. Grade ACM200 is a CVD-coated carbide grade: milling of hardened stainless steel.





