Brand: Nachi
Showing 4353–4368 of 5286 results
-
Sale!
Nachi 100% Original 1060767 29/64 135° Cobalt Jobbers Drill 1 pcs
Original price was: $17.09.$5.70Current price is: $5.70.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1060773 15/32 135° Cobalt Jobbers Drill 1 pcs
Original price was: $17.27.$5.76Current price is: $5.76.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1060780 31/64 135° Cobalt Jobbers Drill 1 pcs
Original price was: $18.97.$6.32Current price is: $6.32.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1060796 1/2 135° Cobalt Jobbers Drill 1 pcs
Original price was: $17.72.$5.91Current price is: $5.91.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1061093 7/16 118° 7-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $225.98.$75.33Current price is: $75.33.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1061109 15/32 118° 7-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $234.50.$78.17Current price is: $78.17.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1061115 3/4 118° 9-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $289.93.$96.64Current price is: $96.64.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1061121 7/8 118° 10-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $351.43.$117.14Current price is: $117.14.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.