Category: General
Hadfield Manganese Steel (Mn13) Machining: Korloy Strategy for Extreme Work-Hardening
Korloy machining strategy for Hadfield manganese steel (Mn13). Covers extreme work-hardening challenges, PC9530 grade selection, positive geometry requirements, depth-of-cut rules, and the economics of fresh edge indexing per pass.
Stellite and Cobalt-Chrome Alloy Machining: Korloy Tooling for Extreme Wear-Resistant Materials
Korloy tooling guide for machining Stellite 6, Stellite 12, and medical cobalt-chrome alloys. Covers PC5300, PC9530, KBN25M grade selection, parameter recommendations, and solutions for rapid flank wear from carbide inclusions.
Waspaloy and Rene 41 Machining: Korloy Solutions for Jet Engine Superalloys
Korloy machining solutions for Waspaloy and Rene 41 jet engine superalloys. Covers PC9530 grade selection, RCMX round inserts, high-pressure coolant requirements, notch wear prevention, and parameter optimization for 40-44 HRC aged conditions.
Titanium Grade 2 vs Grade 5 (Ti-6Al-4V): Korloy Insert and Parameter Differences
Korloy insert and parameter guide for machining Titanium Grade 2 (commercially pure) vs Grade 5 (Ti-6Al-4V). Covers PC9530 grade selection, coolant strategy, chipbreaker geometry, and why CVD coating fails on titanium.
Martensitic Stainless 420 and 440C: Korloy Machining Strategy for Hardened Cutlery Steels
Korloy machining strategy for martensitic stainless steels 420 and 440C in annealed and hardened conditions. Covers PC9530, PC5300, KBN10M grade selection, chipbreaker recommendations, and solutions for carbide stringer edge chipping.
Machining Hardened Steel HRC 58-65: Korloy CBN and Ceramic Insert Selection
Complete guide to machining hardened steel HRC 58-65 with Korloy CBN and ceramic inserts. Covers KBN10M, KBN25M, KBN60M grade selection, speed parameters, edge preparation, and cost-per-part analysis vs grinding.
Grey vs Ductile Cast Iron Machining: Korloy PC8110 and PC3545 Selection Guide
Korloy PC8110 and PC3545 selection guide for grey iron, ductile iron, and CGI machining. Covers dry vs wet strategies, chipbreaker needs, and speed optimization for each iron type.
4140 and 4340 Alloy Steel: Korloy Grade Selection for Quenched and Tempered Conditions
Korloy grade selection guide for 4140 and 4340 alloy steel in pre-heat-treat and post-heat-treat conditions. Covers PC5300, PC3545, NC6315 with parameter recommendations for quenched and tempered material.
Machining S45C / AISI 1045 Carbon Steel: Korloy High-Productivity Setup
High-productivity Korloy setup for machining S45C and AISI 1045 carbon steel. Compares PC5300, PC2510, and PC8110 grades with cost-per-part analysis and parameter optimization.
Hastelloy C-276 Machining: Korloy Solutions for Extreme Corrosion-Resistant Alloys
Korloy machining solutions for Hastelloy C-276 nickel alloy. Covers PC9530 grade selection, positive rake geometry, insert shape priorities, and strategies to combat notch and crater wear.
