Brand: Nachi

Showing 3985–4000 of 5286 results

• Sale!

  Nachi 100% Original 1054237 N 135° Cobalt Jobbers Drill 1 pcs

  $7.54 Original price was: $7.54.$2.51Current price is: $2.51.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054243 5/16 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $17.81 Original price was: $17.81.$5.94Current price is: $5.94.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart
• Sale!

  Nachi 100% Original 1054250 O 135° Cobalt Jobbers Drill 1 pcs

  $8.32 Original price was: $8.32.$2.77Current price is: $2.77.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054266 P 135° Cobalt Jobbers Drill 1 pcs

  $8.88 Original price was: $8.88.$2.96Current price is: $2.96.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054272 21/64 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $20.94 Original price was: $20.94.$6.98Current price is: $6.98.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart
• Sale!

  Nachi 100% Original 1054289 Q 135° Cobalt Jobbers Drill 1 pcs

  $8.95 Original price was: $8.95.$2.98Current price is: $2.98.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054295 R 135° Cobalt Jobbers Drill 1 pcs

  $8.95 Original price was: $8.95.$2.98Current price is: $2.98.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054300 11/32 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $20.94 Original price was: $20.94.$6.98Current price is: $6.98.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart
• Sale!

  Nachi 100% Original 1054317 S 135° Cobalt Jobbers Drill 1 pcs

  $11.18 Original price was: $11.18.$3.73Current price is: $3.73.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054323 T 135° Cobalt Jobbers Drill 1 pcs

  $11.18 Original price was: $11.18.$3.73Current price is: $3.73.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054330 23/64 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $24.70 Original price was: $24.70.$8.23Current price is: $8.23.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart
• Sale!

  Nachi 100% Original 1054346 U 135° Cobalt Jobbers Drill 1 pcs

  $11.18 Original price was: $11.18.$3.73Current price is: $3.73.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054352 3/8 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $24.70 Original price was: $24.70.$8.23Current price is: $8.23.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart
• Sale!

  Nachi 100% Original 1054369 V 135° Cobalt Jobbers Drill 1 pcs

  $12.89 Original price was: $12.89.$4.30Current price is: $4.30.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054375 W 135° Cobalt Jobbers Drill 1 pcs

  $12.89 Original price was: $12.89.$4.30Current price is: $4.30.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1054381 25/64 Size, 118°, Cobalt Taper Length Drill 1 pcs

  $25.77 Original price was: $25.77.$8.59Current price is: $8.59.

  • X-type thinning reduces the thrust load substantially, and the biting performance improves.
  • Cobalt material increases heat resistance and increases drill life and productivity.
  • Used in machining hard material, alloy steel, forging and cast iron.
  • Drilling deeper holes vs standard jobbers length drills.
  • 30° helix.
  • Black oxide
  • Drill torerance; h8.
  • General purpose.
  • X-type thinning point type.

  Add to cart