Brand: Nachi
Showing 4033–4048 of 5286 results
-
Sale!
Nachi 100% Original 1056888 #69 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.81.$0.94Current price is: $0.94.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056894 #68 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.57.$0.86Current price is: $0.86.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056900 1/32 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.50.$0.83Current price is: $0.83.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Manufactured from cobalt steel.
- Cylindrically ground.
- Ground from the solid.
-
Sale!
Nachi 100% Original 1056916 #67 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.57.$0.86Current price is: $0.86.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056922 #66 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.57.$0.86Current price is: $0.86.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056939 #65 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.45.$0.82Current price is: $0.82.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056945 #64 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.45.$0.82Current price is: $0.82.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056951 #63 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.45.$0.82Current price is: $0.82.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056968 #62 135° Cobalt Jobbers Drill 1 pcs
Original price was: $2.45.$0.82Current price is: $0.82.Add to cart- Designed for drilling holes in hard-to-reach places.
- Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- Optimum for high tensile alloys.
- Suitable for use with any standard lubricating/cutting oils, coolant fluids.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
- Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Standard two flute design.
- Standard spiral, helical flutes.
- Straight shanks that corresponds to the drill diameter.
- Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
- Manufactured from cobalt steel.
- Cylindrically ground from the solid.
- Heavy duty, general purpose drills.
- 135° point angle and a heavier web.
-
Sale!
Nachi 100% Original 1056974 3/8 118° 6-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $215.32.$71.77Current price is: $71.77.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1056980 3/8 118° 8-1/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $360.40.$120.13Current price is: $120.13.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1056997 25/64 118° 7 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $215.32.$71.77Current price is: $71.77.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057001 25/64 118° 8-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $360.40.$120.13Current price is: $120.13.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057018 13/32 118° 7 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $220.64.$73.55Current price is: $73.55.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057024 13/32 118° 8-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $360.40.$120.13Current price is: $120.13.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057030 27/64 118° 7-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $225.98.$75.33Current price is: $75.33.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.