Brand: Nachi
Showing 4049–4064 of 5286 results
-
Sale!
Nachi 100% Original 1057047 27/64 118° 8-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $360.40.$120.13Current price is: $120.13.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057053 7/16 118° 8-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $360.40.$120.13Current price is: $120.13.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057060 29/64 118° 7-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $234.50.$78.17Current price is: $78.17.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057076 29/64 118° 8-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $380.42.$126.81Current price is: $126.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057082 15/32 118° 8-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $380.42.$126.81Current price is: $126.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057099 31/64 118° 7-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $235.57.$78.52Current price is: $78.52.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057104 31/64 118° 9 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $383.10.$127.70Current price is: $127.70.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057110 1/2 118° 7-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $235.57.$78.52Current price is: $78.52.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057127 1/2 118° 9 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $383.10.$127.70Current price is: $127.70.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057133 33/64 118° 8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $238.76.$79.59Current price is: $79.59.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057140 33/64 118° 9-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $396.45.$132.15Current price is: $132.15.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057156 17/32 118° 8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $238.76.$79.59Current price is: $79.59.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057162 17/32 118° 9-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $396.45.$132.15Current price is: $132.15.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057179 35/64 118° 8-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $246.23.$82.08Current price is: $82.08.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057185 35/64 118° 9-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $396.45.$132.15Current price is: $132.15.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057191 9/16 118° 8-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $246.23.$82.08Current price is: $82.08.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.