Brand: Nachi
Showing 4081–4096 of 5286 results
-
Sale!
Nachi 100% Original 1057374 45/64 118° 9-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $269.68.$89.89Current price is: $89.89.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057380 45/64 118° 10-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $383.10.$127.70Current price is: $127.70.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057397 23/32 118° 9-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $269.68.$89.89Current price is: $89.89.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057402 23/32 118° 10-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $371.08.$123.69Current price is: $123.69.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057419 47/64 118° 9-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $289.93.$96.64Current price is: $96.64.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057425 47/64 118° 10-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $376.42.$125.47Current price is: $125.47.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057431 3/4 118° 10-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $371.08.$123.69Current price is: $123.69.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057448 49/64 118° 9-7/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $308.90.$102.97Current price is: $102.97.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057454 49/64 118° 10-5/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $392.44.$130.81Current price is: $130.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057460 25/32 118° 9-7/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $308.90.$102.97Current price is: $102.97.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057477 25/32 118° 10-5/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $392.44.$130.81Current price is: $130.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057483 51/64 118° 10 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $318.98.$106.33Current price is: $106.33.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057490 51/64 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $392.44.$130.81Current price is: $130.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057505 13/16 118° 10 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $318.98.$106.33Current price is: $106.33.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057511 13/16 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $392.44.$130.81Current price is: $130.81.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057528 53/64 118° 10-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $323.45.$107.82Current price is: $107.82.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.