WhatsApp:+1 3369798015 EMAIL:wgsina@gmail.com

Cart

Your Cart is Empty

Back To Shop

Brand: Nachi

Showing 4097–4112 of 5286 results

  • Nachi 100% Original 1057534 53/64 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $420.47.Current price is: $140.16.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057540 27/32 118° 10-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $323.45.Current price is: $107.82.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057557 27/32 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $420.47.Current price is: $140.16.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057563 55/64 118° 10-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $351.43.Current price is: $117.14.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057570 55/64 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $427.48.Current price is: $142.49.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057586 7/8 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $420.47.Current price is: $140.16.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057592 57/64 118° 10-5/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $374.94.Current price is: $124.98.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057608 57/64 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $426.08.Current price is: $142.03.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057614 29/32 118° 10-5/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $374.94.Current price is: $124.98.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057620 29/32 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $426.08.Current price is: $142.03.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057637 59/64 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $395.08.Current price is: $131.69.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057643 59/64 118° 11-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $433.09.Current price is: $144.36.
    • Used in heavy-duty applications.
    • Delivers coolant to the point permit higher speeds and feeds and reduce high temperatures.
    Add to cart
  • Nachi 100% Original 1057650 15/16 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $395.08.Current price is: $131.69.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057666 15/16 118° 10-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $426.08.Current price is: $142.03.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart
  • Nachi 100% Original 1057672 61/64 118° 10-7/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $420.83.Current price is: $140.28.
    • For drilling operations where a coolant or oil delivery system is available.
    • For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suitable for a variety of drilling applications and conditions.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through their length to feed fluid to the drill.
    • Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
    • Standard straight shanks that correspond to drill diameter.
    • Taper length drills have flutes proportional to length.
    • Manufactured from M35 cobalt.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    • Shank coolant entry to suit industry standard toolholders.
    Add to cart
  • Nachi 100% Original 1057689 61/64 118° 11 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs

    Original price was: $489.15.Current price is: $163.05.
    • Coolant-fed drills offer extended tool life.
    • Two flute design offers faster feed and larger material removal rates.
    • Constant heavy-duty web for greater strength.
    • Low thrust design allows for easier penetration.
    • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
    • Cobalt is harder than high-speed steel and is suited for better wear resistance.
    • For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
    • Suited for heavy-duty, drilling operations for tougher materials.
    • The 118° split point works for general-purpose drilling.
    • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
    • Can also be used for handheld applications.
    • Right hand (clockwise rotation) cutting direction.
    • Made with two holes through length to feed fluid to drill.
    • 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
    • These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
    • Large coolant orifices provide maximum flow of coolant to workpiece.
    • Cylindrically ground.
    • Constant heavy duty web for greater strength.
    Add to cart