Brand: Nachi
Showing 4129–4144 of 5286 results
-
Sale!
Nachi 100% Original 1057855 1-3/16 118° 13 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $681.17.$227.06Current price is: $227.06.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057861 1-7/32 118° 12-1/8 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $608.86.$202.95Current price is: $202.95.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057878 1-1/4 118° 12-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $634.60.$211.53Current price is: $211.53.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057884 1-1/4 118° 13-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $829.74.$276.58Current price is: $276.58.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057890 1-5/16 118° 14-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $705.11.$235.04Current price is: $235.04.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057906 1-5/16 118° 14-1/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $1,003.53.$334.51Current price is: $334.51.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057912 1-3/8 118° 14-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $789.06.$263.02Current price is: $263.02.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057929 1-3/8 118° 14-1/2 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $1,087.62.$362.54Current price is: $362.54.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057935 1-7/16 118° 14-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $883.06.$294.35Current price is: $294.35.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057941 1-7/16 118° 14-3/4 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $1,205.36.$401.79Current price is: $401.79.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
-
Sale!
Nachi 100% Original 1057958 1-1/2 118° 15 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $958.06.$319.35Current price is: $319.35.Add to cart- For drilling operations where a coolant or oil delivery system is available.
- For drilling holes in a variety of normal steels, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suitable for a variety of drilling applications and conditions.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through their length to feed fluid to the drill.
- Normal spiral and a normal 118° drill point angle, notch point, and a rolled heel for better coolant delivery and chip ejection.
- Standard straight shanks that correspond to drill diameter.
- Taper length drills have flutes proportional to length.
- Manufactured from M35 cobalt.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
- Shank coolant entry to suit industry standard toolholders.
-
Sale!
Nachi 100% Original 1057964 1-1/2 118° 15 OAL M35 5% Cobalt Coolant Fed Drill 1 pcs
Original price was: $1,257.22.$419.07Current price is: $419.07.Add to cart- Coolant-fed drills offer extended tool life.
- Two flute design offers faster feed and larger material removal rates.
- Constant heavy-duty web for greater strength.
- Low thrust design allows for easier penetration.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Cobalt is harder than high-speed steel and is suited for better wear resistance.
- For drilling holes in steel, cast iron, and other ferrous and non-ferrous metals and alloys.
- Suited for heavy-duty, drilling operations for tougher materials.
- The 118° split point works for general-purpose drilling.
- Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
- Can also be used for handheld applications.
- Right hand (clockwise rotation) cutting direction.
- Made with two holes through length to feed fluid to drill.
- 30° to 34° flute helix and constant heavy duty web design add to the overall drill strength and aid in chip removal.
- These drills are provided with dual coolant entry in the tang end and the side of the taper to adapt to industry standard holders.
- Large coolant orifices provide maximum flow of coolant to workpiece.
- Cylindrically ground.
- Constant heavy duty web for greater strength.
