Brand: Nachi
Showing 4449–4464 of 5286 results
-
Sale!
Nachi 100% Original 1080710 1/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $1.65.$0.55Current price is: $0.55.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080727 5/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $1.57.$0.52Current price is: $0.52.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080733 3/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $1.57.$0.52Current price is: $0.52.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080740 7/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $1.78.$0.59Current price is: $0.59.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080756 1/8 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $2.25.$0.75Current price is: $0.75.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080762 9/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $2.08.$0.69Current price is: $0.69.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080779 5/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $2.26.$0.75Current price is: $0.75.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080785 11/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $2.55.$0.85Current price is: $0.85.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080791 3/16 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $2.99.$1.00Current price is: $1.00.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080807 13/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $3.42.$1.14Current price is: $1.14.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080813 7/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $3.77.$1.26Current price is: $1.26.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080820 15/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $4.05.$1.35Current price is: $1.35.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080836 1/4 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $4.20.$1.40Current price is: $1.40.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080842 17/64 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $4.81.$1.60Current price is: $1.60.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
-
Sale!
Nachi 100% Original 1080859 9/32 Size 135° Cobalt Screw Machine Length Stub Drill 1 pcs
Original price was: $5.23.$1.74Current price is: $1.74.Add to cart- Low thrust design allows for easier penetration.
- Two flute design offers faster feed and larger material removal rates.
- Shorter length allows shallower holes to be drilled.
- Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
- Bronze Oxide coating gives a polished finish and thus increased lubricity.
- Cobalt is harder than high-speed steel and suited for better wear resistance.
- Optimum for high tensile alloys.
- For machining operations in screw machines.
- Short lengths offer increased rigidity for machine drilling a variety of materials & alloys.
- Suited for drilling Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics
- Designed for machining operations in screw machines.
- Suitable to drill on various workpiece surface including Steel, Stainless Steel, High-Temp Exotic Alloys, Cast Iron, Plastics.
- Designed for hand-held manual drills and either portable or stationary machines.
- Stub screw machine twist drills in over 30 models, available in sizes 1/2 inch and under.
- Low thrust design: 135 degrees self-centering Split Point.
- Standard two flute design with spiral, helical flutes.
- Right hand (CW) cutting direction.
- Right-hand cutting, heavy-duty screw drill.
- Straight, bright-finished shank corresponds to the drill diameter.
- Stub lengths are proportional to the drill diameter.
- Cobalt base material with Bronze Oxide.
- Straight shank for universal compatibility.
- Overall length range: 1-3/8 to 3-3/4 inches.
