Brand: Nachi

Showing 4337–4352 of 5286 results

• Sale!

  Nachi 100% Original 1060606 #2 135° Cobalt Jobbers Drill 1 pcs

  $5.01 Original price was: $5.01.$1.67Current price is: $1.67.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060612 #1 135° Cobalt Jobbers Drill 1 pcs

  $5.01 Original price was: $5.01.$1.67Current price is: $1.67.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Straight shanks that corresponds to the drill diameter.
  • Jobbers length corresponds to the drill diameter. The jobbers length used for each of these drills is variable and determined by the specific drill diameter, offering the best balance between overall drill rigidity and depth capacity for each drill diameter.
  • Manufactured from cobalt steel.
  • Cylindrically ground from the solid.
  • Heavy duty, general purpose drills.
  • 135° point angle and a heavier web.

  Add to cart
• Sale!

  Nachi 100% Original 1060629 15/64 135° Cobalt Jobbers Drill 1 pcs

  $4.40 Original price was: $4.40.$1.47Current price is: $1.47.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060635 1/4 135° Cobalt Jobbers Drill 1 pcs

  $4.70 Original price was: $4.70.$1.57Current price is: $1.57.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060641 17/64 135° Cobalt Jobbers Drill 1 pcs

  $5.48 Original price was: $5.48.$1.83Current price is: $1.83.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060658 9/32 135° Cobalt Jobbers Drill 1 pcs

  $5.74 Original price was: $5.74.$1.91Current price is: $1.91.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060664 19/64 135° Cobalt Jobbers Drill 1 pcs

  $6.87 Original price was: $6.87.$2.29Current price is: $2.29.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060670 5/16 135° Cobalt Jobbers Drill 1 pcs

  $7.35 Original price was: $7.35.$2.45Current price is: $2.45.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060687 21/64 135° Cobalt Jobbers Drill 1 pcs

  $6.79 Original price was: $6.79.$2.26Current price is: $2.26.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060693 11/32 135° Cobalt Jobbers Drill 1 pcs

  $8.81 Original price was: $8.81.$2.94Current price is: $2.94.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060709 23/64 135° Cobalt Jobbers Drill 1 pcs

  $10.38 Original price was: $10.38.$3.46Current price is: $3.46.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060715 3/8 135° Cobalt Jobbers Drill 1 pcs

  $10.56 Original price was: $10.56.$3.52Current price is: $3.52.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060721 25/64 135° Cobalt Jobbers Drill 1 pcs

  $11.99 Original price was: $11.99.$4.00Current price is: $4.00.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060738 13/32 135° Cobalt Jobbers Drill 1 pcs

  $12.53 Original price was: $12.53.$4.18Current price is: $4.18.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060744 27/64 135° Cobalt Jobbers Drill 1 pcs

  $13.78 Original price was: $13.78.$4.59Current price is: $4.59.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart
• Sale!

  Nachi 100% Original 1060750 7/16 135° Cobalt Jobbers Drill 1 pcs

  $14.32 Original price was: $14.32.$4.77Current price is: $4.77.

  • Designed for drilling holes in hard-to-reach places.
  • Black Oxide type. 135° Split point design is self-centering and helps to reduce the thrust requirements.
  • Low thrust design allows for easier penetration.
  • Two flute design offers faster feed and larger material removal rates.
  • Lower helix angle offers enhanced strength, reduced lifting, and larger chip evacuation.
  • Cobalt is harder than high-speed steel and is suited for better wear resistance.
  • Optimum for high tensile alloys.
  • Suitable for use with any standard lubricating/cutting oils, coolant fluids.
  • Suited for heavy-duty, drilling operations for tougher materials.
  • The 135° split point works for drilling alloy steels, manganese steels, harder stainless steels, and a variety of tough ferrous alloys.
  • Works well with tough high tensile strength non-ferrous materials like titanium and Inconel due to their heat resistance.
  • Cobalt drills are well suited for heavy-duty operations in high tensile strength, low machinability, ferrous metals, and alloys.
  • Can also be used for handheld applications.
  • Right hand (clockwise rotation) cutting direction.
  • Standard two flute design.
  • Standard spiral, helical flutes.
  • Manufactured from cobalt steel.
  • Cylindrically ground.
  • Ground from the solid.

  Add to cart